Nullifire FS711 Spray Grade Acrylic Sealant
Nullifire FS711 Spray Grade Acrylic Sealant is a single component, water based sprayable acrylic sealant.
Nullifire FS711 Spray Grade Acrylic Sealant is a single component, water based sprayable acrylic sealant. The product is designed to be used in conjunction with a suitable density mineral fibre board. It is also used for painting around a masked off service opening to provide an aesthetic finish.
Features & Benefits
- Tested in accordance with EN1366 Pt 3 and 4 up to 4 hours Classifcation EN 13501:2007
- Suitable for use in conjunction with FB747 Coated Batts
- Suitable for spray or brush application
- Resistant to mould, fungus and vermin attack
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close