SikaBoom FR
  • SikaBoom FR

SikaBoom FR

SikaBoom FR is ideal for sealing pipes penetrating through brickwork and openings in walls, etc. For insulating between brickwork and cladding, around ducting and through cavities carrying pipes and cables where fire protection is required.

Colour
Size
£122.07
VAT excluded

£146.48 Tax incl.
Quantity

Description

SikaBoom FR is ideal for sealing pipes penetrating through brickwork and openings in walls, etc. For insulating between brickwork and cladding, around ducting and through cavities carrying pipes and cables where fire protection is required.

Features & Benefits

  • High yield
  • Multi-positioning foam. Can be applied in all positions (360°)
  • Easy application with valve nozzle (adapter)
  • Suitable for application at lower temperatures (+5°C)
  • Fast curing
  • Excellent temperature insulation
  • Effective sound dampening
  • Ageing resistant
  • CFC/HFC-free
  • Resistant to temperatures ranging from -40°C to +100°C

Limitations

  • The aerosol can temperature has to be +5°C min. and +25°C max. For optimum flow and expansion the aerosol can temperature should be +20°C.
  • Protect the can from direct sun and temperatures above +50°C (danger of explosion).
  • For the correct curing of the foam sufficient moisture is necessary.
  • Do not use on PE, PP, Teflon, Silicone, Oil, Grease and other separating agents.
  • Foam is not resistant to UV light.
  • Read the safety and technical recommendations printed on the aerosol-can.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Envirograf CLVM Clipper Range for Toilet Ventilation Fire Protection

CLVM Clipper Range Toilet Ventilation Fire Protection for toilet and bathroom ventilation fan units on ceiling or walls, protecting PVC and flexible PVC pipes from fire with intumescent material inside the top and at the base, fixing into place. Up to 90 minutes fire protection Slides over PVC pipes Simple to fit Refer to sizes below

Price £21.80
In stock

Envirograf Intumescent Downlighter Cages

Intumescent Downlighter Cages provide fire protection in plasterboard and suspended ceilings, covering downlighters, transformers and loudspeakers. Other sizes made to order. Protects without overheating Easy to install in minutes, from below or above Loft covers available Refer to sizes below

Price £12.74
In stock

Firetherm 30/90

Firetherm 30/90, providing a 30 or 90-minute fire and smoke barrier in roof voids and large volume areas. Can also be used to provide a fire and smoke barrier in suspended ceiling applications and raised floors. See size references below for 30 or 90-minute fire barriers Lightweight for easy installation Easy to handle on rolls of 65 m2...

Price £75.95
In stock

Firetherm Intucollar

Firetherm Intucollars seal off plastic, metal and insulated pipes as they pass through fire barriers, crushing weakened pipes in a fire and helping prevent the spread of fire and smoke. This new, improved version of Intucollar is available in multiple sizes (see table below); other sizes are available to order by special request - contact our...

Price £8.04
In stock

Envirograf Fire Break Membrane

A non-pourous Fire Break Membrane for roofs, preventing spread of fire between adjoining properties for up to 60 minutes. Waterproof Fits below roofing profiles Other sizes can be made to order, for wider or narrower gaps between trusses each side of partition walls. Contact our sales team on 0113 245 5450 for more information.

Price £34.56
In stock

Envirograf Board for the Protection of Steelwork

Use this Board for the Protection of Steelwork for extra fire protection of steelwork and metal ducting. Price is per board Refer to size guide below Sheet size: 1000mm x 1200mm Easy cut with a sharp knife Non-fibrous Can be faced with decorative laminates or painted Simply sticks into place

Price £46.38
In stock

Firetherm P.E Backing Rods

Use Firetherm PE Backing Rods to control sealant depth in sealant joints, avoiding 3-sided adhesion. Priced per metre - see ordering references below

Price £0.15
In stock

Envirograf VWBS Ventilated Cavity Barriers

VWBS Ventilated Cavity Barriers made from flexible fireproof sponge, for use in brick/block cavities. Its unique spring properties mean it can be fixed simply by pressing into place. Refer to sizes below Must only be used horizontally Barrier must be 10mm wider than the cavity Offers thermal insulation Up to 2 hours fire protection

Price £24.17
In stock

Thermoguard Intumescent Mastic

Thermoguard Intumescent Mastic is an easy to apply, intumescent sealant that provides a 5 hour fire barrier coupled with excellent sound reduction properties. Permanently flexible and excellent slump resistance it is ideal for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures.

Price £3.00
In stock

Firetherm Intusleeve

Firetherm Intusleeve, an intumescent steel sleeve for combustible pipes, providing up to 4 hours fire resistance for pipes passing through fire-rated walls and floors, and cavities in stud work walls. Ultra-slim design Up to 4 hours of fire resistance Less obtrusive than externally fitted fire collars A great solution for angled pipes

Price £13.92
In stock

Nullifire FB760 Seal Bags

Nullifire FB760 Seal Bags are made from a composite material, encased within a durable, woven glass fibre bag. Nullifire FB760 is certified to EN 1366-3 and Classified EN 13501-2.

Price £218.30
In stock

Envirograf Soffit Board Intumescent Ventilator

These metal Soffit Board Intumescent Ventilators replace plastic soffit grilles, expanding in fire to fill gaps and voids to prevent the spread of fire to loft and roof areas. Refer to size guide below Circular and rectangular shapes Other sizes can be made to order

Price £13.99
In stock

Envirograf Intumescent Putty

Water-based Intumescent Putty that is ideal for filling round metal and plastic pipes and cables for extra fire protection. Unaffected by moisture once the face has sealed. Use round glass in steel frames Over PVE/foam Buff coloured but could have slight variation in colour Stays permanently flexible internally Subjected to tests...

Price £6.10
In stock

Envirograf Surface Mounted, Brush Smoke Seals

Envirograf Surface Mounted, Brush Smoke Seals with self adhesive backing tape are for use where intumescent seals are already fitted and smoke sealing is needed. To fit, simply peel off the backing paper from the self-adhesive strip and stick to the door frame, down the edge of the rebate. Panel pins are supplied for additional fixing. See...

Price £3.84
In stock

Envirograf Intumescent Hinge, Lock and Door Closer Protection

Envirograf Intumescent Hinge, Lock and Door Closer Protection is a flexible intumescent protection sheet 1mm thick, fitted with self-adhesive backing, and unaffected by moisture. Supplied in standard sizes to make installation quick and convenient. For use behind hinges and steel door closers and completely wrapped around the hidden parts of lock hardware...

Price £0.73
In stock