Nullifire FF197 Gun Grade Fire Rated PU Foam is a modified, single component, fire rated polyurethane foam, used to seal linear gaps throughout the fire rated areas of a building.
Envirograf Animal Door Flap Protection
Animal Door Flap Protection for fire doors; a thermal cutout releases a fire curtain for protection up to 60 minutes.
- Easy to install
- Fits Staywell flap types
- Not for aluminium cat flaps
Order Reference & Sizes
Colours available - brown, white, grey
Other sizes can be made to order.
|Ref||Staywell Flap Type||Flap Cutout Size||Flap Protector Cutout Size|
|FP01||Series 300/400/500||168mm x 175mm||228mm x 235mm|
|FP02||Series 600 (Small)||245mm x 150mm||305mm x 210mm|
|FP03||Series 600 (Medium)||348mm x 225mm||408mm x 285mm|
|FP04||Series 600 (Large)||451mm x 277mm||521mm x 347mm|
|FP05||Series 600 (Extra Large)||642mm x 366mm||722mm x 446mm|
|FP06||Series 700 (Small)||180mm x 155mm||240mm x 213mm|
|FP07||Series 700 (Medium)||265mm x 230mm||325mm x 290mm|
|FP08||Series 700 (Large)||354mm x 306mm||424mm x 376mm|
|FP09||Series 800||429mm x 291mm||499mm x 361mm|
|FP10||Series 900||169mm x 169mm||229mm x 229mm|
Protect the integrity of fire doors in houses and apartments with Envirograf Animal Door Flap Protection for fire protection up to 60 minutes.
Cat flaps fit inside the metal frame unit, and a thermal cutout releases a fire curtain to drop down once temperatures, or the cat flap, reaches 70°C.
Important - not suitable for aluminium cat flaps.
For more information about this product's details, Test Data and Test Results included in manufacturer attachments, please contact our Technical Support team on 0113 245 5450, or send us a message here.
A rectangular or square opening is cut into the door or wall as specified for the particular unit (Petsafe/Staywell etc.) For example, for an opening of 348mm x 225mm specified by the flap manufacturer, the opening for the Envirograf® fire protection unit would need to be cut to 418mm x 295mm. each unit supplied has its own hole cutting requirements and these should be checked when ordering.
The Envirograf® fire protection unit is supplied in two sections. The first part fits into the outside of the door or wall and has four fixing screws. The second part fits through the inside of the opening, into the first part and also has four fixing screws. The original branded cat/dog flap then screws to the face of the Envirograf® fire protection unit so it will be necessary to drill small holes in the metal face of the unit for the screws from the cat/dog flap.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Firetherm Intutac bonds structural steel and ductwork protection boards in internal situations Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970 Supplied in a 10 litre tub (1.7KG per litre)
Door and Cupboard Vent Grilles, ideal for areas with high condensation & steam without a window, such as hotel bathrooms & shower rooms, or domestic utility rooms with washing machines & tumble dryers. Refer to size guide below East to install Standard sizes - others can be made to order Use in housed gas meters
Envirogrip Fire-Resistant Adhesive is flexible and multi-purpose, ideal for builders and tradesmen alike. Low odour Solvent-free Ready to use Bonds most materials & substrates Applies to damp substrates without affecting strength Can be prepared & painted over
Firobond Ultra Adhesive bonds a wide range of materials and substrates, including all woods and joints, in fire protection applications. Bonds mineral wool insulation Magnesium oxide/cement boards Fully cured in 24 hours Thixotropic, for easy application
Firetherm Slotted Steel Angles and Straps for securing fire barriers above partition walls in fire stopping applications. Made from DX51D+Z275 NAC galvanised steel 20 x 6mm slotted holes @ 300mm Ctrs in centre on both sides of angle and centre of strap. Meets relevant British Standards - see description below for more details
Protecta FR Damper fire proofs ventilation ducts that pass through fire-rated walls & floors, preventing spread of fire & smoke both surrounding & inside ducts. The steel casing contains horizontal steel blades treated with a technically advanced heat expanding graphite, closing off the damper in fire. Closes in the area where...
Intumescent Downlighter Covers provide fire protection in plasterboard and suspended ceilings, for up to an hour. Covers downlighters, transformers and loudspeakers. Other sizes made to order. Protects without overheating Easy to install in minutes, from below or above Loft covers available Refer to sizes below Loft covers only...
An easy to apply, intumescent sealant that provides a 5 hour fire barrier coupled with excellent sound reduction properties. Permanently flexible and excellent slump resistance it is ideal for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures.
Use this Board for the Protection of Steelwork for extra fire protection of steelwork and metal ducting. Price is per board Refer to size guide below Sheet size: 1000mm x 1200mm Easy cut with a sharp knife Non-fibrous Can be faced with decorative laminates or painted Simply sticks into place
Envirograf 240v to 24v Control Unit, for use with Envirograf Fire & Smoke Grilles (Product 34), and Envirograf Smoke Detector with Base & Terminals (Product 34).
The N/F Powerful Flexible Filler Kit for Pipes & Cables fills and finishes around metal pipes and cables with intumescent material for up to 2 hours fire protection. 3 tube kit Water-based For plasterboard and solid substrates
Buildfix Multi-Purpose Flexible Building Adhesive is a multi-purpose adhesive for fixing most materials and substrates, giving a strong flexible bond that is water-resistant when dry, reducing the need for screws and nails. Great for fixing skirting, dado rails, panels and plasterboard. Low odour Solvent-free Ready to use Convenient...
Rainbar Plus is an open-state cavity barrier for use within rain screen cladding systems, allowing free airflow and moisture release whilst maintaining fire barrier compartmentalisation for up to an hour. Price on Request Please contact our sales team on 0113 2455450 for pricing information and to place an order. Easy to fix on-site using...