Nullifire (Firetherm) FO142 Intutac bonds structural steel and ductwork protection boards in internal situations.
Sodium silicate adhesive
Bonds in 5 minutes
Fully cured in 8 to 12 hours
Forms a water-resistant seal unaffected by moisture
Forms to a non-combustible film to BS 476 Part 4: 1970
To qualify for Express (1-3 day) shipping, basket value must exceed £75.00 + VAT. Orders below this amount will only be available on Economy (7-10 day) shipping
Nullifire FO142 Intutacprovides a water-resistant seal that is unaffected by moisture and is an adhesive for use in fire protection applications.
The sodium silicate adhesive has a buttery consistency that dries to form a non-combustible film to BS 476 Part 4: 1970.
Installation
Read Intutac safety data sheet before starting work.
Surfaces should be clean and dry, free of dust, grease and loose material.
Stir Intutac thoroughly and apply evenly over the surface to be bonded using a brush or flat-bladed tool at a rate of 2.5 m² per litre.
Specifications
Drying time: bond time 0 to 5 minutes
Full cure: 8 to 12 hours
Coverage: 2.5 m²/l
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
An extensive range of accessories and ancillary products for use with Nullifire (Firetherm) systems, helping the installation and application of firestopping products. Refer below to see the full range.
To qualify for Express (1-3 day) shipping, basket value must exceed £75.00 + VAT. Orders below this amount will only be available on Economy...
Nullifire FJ203 Fire Resistant Backer Rod is a firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.
Can be used...
Nullifire FO143 Intutac Gun Grade Silicate Adhesive is a silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry.
Up to 240 minutes fire resistance
Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre...