An extensive range of accessories and ancillary products for use with Firetherm systems, helping the installation and application of firestopping products. Refer below to see the full range.
Firetherm P.E Backing Rods
Use Firetherm PE Backing Rods to control sealant depth in sealant joints, avoiding 3-sided adhesion.
Priced per metre - see ordering references below
|Diameter (in mm's)||Length|
|10mm||Priced per metre|
Use Firetherm PE Backing Rods to control sealant depth in sealant joints, avoiding 3-sided adhesion. Please refer to the attachments tab above for more information, or give our technical team a call on 0113 2455450 or by email.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!