- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Protecta FR IPT 4hr One Part Sealant & Adhesive
FR-IPT
PRO4204
NOTE: This item is currently unavailable until the 12th of September 2022
Protecta FR IPT 4hr One Part Sealant & Adhesive, a high performance, professional quality, one-part ready-to-use sealant and adhesive with up to 4 hours fire protection - offering tradesman one solution for all internal building applications.
- Suitable for a wide variety of internal building trade applications including decorating, sealing, joinery, plumbing and tiling
- Out-performs conventional silicone, MSP, butyl and acrylic based products as a sealant and adhesive
- Compatible with a wide range of substrates: Brick, concrete, stone, ceramic, wood, metal, polystyrene, plasterboard and many more
- Primer-less with excellent adhesion - fast curing
- Fire rated up to 4 hours both integrity and insulation
- Recommended for use in joints up to 20mm wide, larger joints widths can be accommodated
- See below for more benefits and features, application and test data
- NEW - Eco-Foil system - Reduces on-site waste by more than 90%
- Requires both foils and empty cartridge
Description
Protecta FR IPT 4hr One Part Sealant & Adhesive is a high performance, professional quality, one-part ready-to-use sealant and adhesive, part of the Protecta Firestopping range, providing up to 4 hours fire protection. With a wide number of products available on the market and a variety of grades and variations in properties to suit the substrate or application, Protecta FR IPT offers tradesman one solution for all internal building applications.
NEW - Eco-Foil System
The system works by inserting a 300ml foil into the reusable Eco-Cartridge, which fits into a standard skeleton gun. The cartridge has a double-ended plunger, so once the foil is empty, remove the cap and nozzle and re-fill the opposite end with a new 300ml foil. Simply replace the cap and nozzle at the opposite end, insert into the dedicated foil gun and the system is ready for use!
- One Eco-Cartridge can be reused a minimum of 60 times
- Reduces on-site waste by more than 90%
- The system fits into a standard skeleton gun
- 6 months longer shelf life than the same product in a cartridge
Based on an innovative new Inert Polymer Technology it is suitable for a wide variety of internal building trade applications including:
- Decorating
- Sealing around flooring
- Joinery
- Plumbing
- Tiling
- Internal sealing around doors and windows
- Sealing where air quality for health is important
- Sanitary applications including showers
- Sealing of gaps around fitted furniture and worktops
- Fire resistant sealing
- Radon resistant sealing
- Decorating caulking and sealing
- Air and sound sealing
It out-performs conventional silicone, MSP, butyl and acrylic based products as a sealant and adhesive – the only sealant free from dangerous emissions.
Compatible with a wide range of substrates, such as:
- Brick, concrete, stone, slate, ceramic, marble, granite
- Timber, plywood, block board, chipboard, fibreboard
- uPVC plastic trims and polycarbonate
- Insulating board
- Expanded polystyrene
- Plasterboard and plaster
- Metals, aluminium, steel, lead, copper and alloys
- Painted surfaces
It can be used as an adhesive and has excellent initial grab, quickly developing a high bond strength resulting in a permanent fixing. Easy and economical to apply and ideal for general construction, the sealant remains permanently flexible and is paintable with both alkyd resin and water-based paints. IPT is a non-reactive environmentally friendly chemistry that ensures compatibility with most building materials and has the unique property of moving dynamically to accommodate the natural or unexpected movements of sealed/bonded joints within a building, for long-lasting performance. Surplus uncured material can be easily removed using a damp cloth as the uncured sealant is completely soluble in water.
Features & Benefits
- One solution for all internal building applications
- Primer-less adhesion
- Excellent adhesion to most common substrates
- Dynamic for low and high modulus applications
- Fast cure - max bond strength is attained in 24 hours
- 3D joint movement capability minimum 25%
- Can be used for all applications internally
- Fire rated up to 4 hours both integrity and insulation
- Resistant against radon (radioactive particles)
- Recommended for use in joints up to 20mm wide, larger joints widths can be accommodated
- Excellent slump resistance
- Only technology available that is VOC-free
- Resistant to mould and mildew
- Low dirt pick up
- Non staining on susceptible surfaces
- Easy to apply and tool off
- Excess can be wiped before curing with a damp cloth
- Paintable
- Low shrinkage
- Does not yellow
- Compatible with a wide range of substrates:
- Brick, concrete, stone, slate, ceramic, marble, granite
- Timber, plywood, block board, chipboard, fibreboard
- uPVC plastic trims and polycarbonate
- Insulating board
- Expanded polystyrene
- Plasterboard and plaster
- Metals, aluminium, steel, lead, copper and alloys
- Painted surfaces
- Suitable applications include:
- Internal sealing around doors and windows
- Sealing where air quality for health is important
- Sanitary applications including showers
- Sealing of gaps around fitted furniture and worktops
- Sealing around flooring
- Fire resistant sealing
- Radon resistant sealing
- Decorating caulking and sealing
- Air and sound sealing
Ordering References
| Reference | Product Name | Size | Colour | Box Quantity |
|---|---|---|---|---|
| I013 | Protecta FR IPT 4hr One Part Sealant & Adhesive | 300ml cartridge | White | Box of 25 |
| I014 | Protecta FR IPT 4hr One Part Sealant & Adhesive | 600ml foil | White | Box of 12 |
Product Data
| Form | Ready to use thixotropic paste |
|---|---|
| Specific Gravity | 1,54 g/cm² |
| VOC | 0 g/l |
| Durability w/ageing | Type X (UV / water) (pass) |
| Chemical resist | Test passed (resistant) |
| Saltwater immersion | Test passed (resistant) |
| Microbiologic growth | 0 (no growth) |
| Hardness | Shore A 47 |
| Shrinkage | 15% volume single sided |
| Tensile properties | 3,79 MPa (379 N/mm²) |
| Tensile elongation | 270% |
| 3D-tensile prop. | 0,24 MPa (24 N/cm²) |
| 3D-tensile elong. | 106% |
| Tear properties | 50% |
| Compression resist | 434 N / 1569 MPa |
| Radon resistance | 1.5mm thickness IPT gives Z = 2.9 108 s/m |
| Flashpoint | None |
| Reaction to fire | Classification D-s2, d0 |
| Fire resistance | Up to class EI 240 |
| Tack-free time | 60 minutes maximum |
| Skin time | 30 minutes maximum |
| Rate of cure | 10% at 24 hours |
| Solids content | > 80% |
| Resistance to flow | < 0.5 mm |
| Shelf life | Up to 12 months when stored in unopened cartridges under cool dry conditions and 6 months in opened and resealed cartridges. Avoid temperatures above 35°C & below 5°C. |
| Frost | Uncured sealant should not be frozen |
| Thermal Conductivity | 0.845 W/mK (+/- 3%) at 20mm depth (to EN 12667). |
| Compatibility | Can be used in contact with most building and decorating materials |
| Service Temp | -40°C to +75°C |
| Classification | Facade (interior) 25LM Sanitary joints XS1 |
| Health & safety | No health hazard, indoor hygiene EMICODE EC1PLUS classification, approved for BREEAM rated building projects. See safety data sheet |
| Test laboratories | SP Sveriges Provningsverk, SE Intertek Chemicals & Phar., GB BM Trada, GB Eurofins Product Testing, DK |
Installation
- All surfaces must be clean and sound, free from dirt, grease and other contaminants. The surfaces may be damp but not running wet. Use a wet brush to clean surfaces before application to remove loose material and to ensure good contact for adhesion. Primers are not usually required.
- In order to obtain maximum performance as a sealant the depth of the joint should be at least half the width and not less than 6mm. The use of backing material is strongly recommended e.g. polyethylene backer rod or mineral wool.
- Cut nozzle to the desired angle and gun firmly into the joint to give a good solid fill. Strike off the sealant flush with the joint sides within ten minutes of application, before surface skinning occurs. The sealant will have medium shrinkage during cure and if a flush surface it is recommended to leave the sealant proud.
- The sealant can be tooled to a smooth finish using a moist plastic stick or similar within 30 minutes of application. IPT Tooling designed for the optimum finish is recommended instead of soap and water as it forms a film between the stick and the sealant.
- Do not spray the sealant with water or other fluids before skin formation ( <30 min). Uncured sealant is soluble in water prior to skinning due to its environmentally friendly IPT chemistry that uses water instead of solvents.
Resistance to Fire – Linear Seals
| Construction | Seal position | Minimum seal depth | Backing material | Maximum seal width | Fire resistance |
|---|---|---|---|---|---|
| Drywalls, masonry, aerated concrete or concrete walls (≥ 75 mm thick) | Both sides against steel partition horizontal tracks | 12.5 mm | None necessary | 25 mm | EI 45 (E 60) |
| Drywalls, masonry, aerated concrete or concrete walls (≥ 100 mm thick) | Both sides against steel partition horizontal tracks | 12.5 mm | None necessary | 25 mm | EI 60 (E 90) |
| 12.5 mm | Mineral stone wool minimum 12.5mm deep | 30 mm | EI 120 (E 120) | ||
| Both sides against steel partition vertical tracks | 12.5 mm | None necessary | 15 mm | EI 120 (E 120) | |
| Both sides in horizontal or vertical seals | 12.5 mm | Mineral stone wool minimum 12.5mm deep | 30 mm | EI 120 (E 120) | |
| Rigid walls comprise masonry, aerated concrete or concrete, within walls or between the head of walls and the soffit of floor slabs (≥ 150 mm thick) | Single sided in horizontal seals | 15.0 mm | Mineral stone wool minimum 45mm deep | 30 mm | EI 60 (E 240) |
| Double sided in horizontal seals | 15.0 mm | Mineral stone wool minimum 45mm deep | 30 mm | EI 240 (E 240) | |
| Rigid floors comprise aerated concrete or concrete within floors or between floors and walls (≥ 150 mm thick) | Single sided top face | 25.0 mm | Protecta Mineral Fibre BIO minimum 48mm deep | 30 mm | EI 180 (E 240) |
| Double sided top and soffit | 15.0 mm | Mineral stone wool minimum 20mm deep | 30 mm | EI 240 (E 240) |
Emission data (indoor air quality)
| Compound | Emission rate after 3 days | Emission rate after 4 weeks |
|---|---|---|
| TVOC | 7,7 µg/m³ | n.d. (< 5 µg/m³) |
| TSVOC | n.d. (< 5 µg/m³) | n.d. (< 5 µg/m³) |
| VOC w/o NIK | n.d. (< 5 µg/m³) | n.d. (< 5 µg/m³) |
| R Value | n.d. (< 1) | n.d. (< 1) |
| Formaldehyde | n.d. (< 3 µg/m³) | n.d. (< 3 µg/m³) |
| Acetaldehyde | n.d. (< 3 µg/m³) | n.d. (< 3 µg/m³) |
| Sum for+ace | n.d. (< 0,002 ppm) | n.d. (< 0,002 ppm) |
| Carcinogenic | n.d. (< 1 µg/m³) | n.d. (< 1 µg/m³) |
| n.d. = not detected | ||
IPT complies with the requirements of GEV and the results correspond to the EMICODE emission class EC1-PLUS which is the best possible environmental and indoor hygiene health protection mark.
IPT is the only technology available with no dangerous emissions during usage and curing. Tested by Eurofins Product Testing, report number G17798A.
Usage
| Usage for a standard 300ml cartridge | ||||||
|---|---|---|---|---|---|---|
| Joint size (mm) | 6x6 | 9x6 | 12x6 | 25x10 | 7x7 fillet | 10x10 fillet |
| Linear metres/cartridge | 8.63 | 5.5 | 4.1 | 1.2 | 12 | 6 |
Sound Insulation
| Description | Sound reduction |
|---|---|
| Single sided seal ≥12mm depth | Rw 62 dB |
| Double sided seal ≥12mm depth | > Rw 62 dB |
Protecta FR IPT has been tested at EXOVA BM Trada (UKAS accredited); according to EN ISO 10140-2:2010.
Usage of any backing material is optional, due to the tests being conducted with sealant only.
Limitations
- Where metals are not compatible with water contact, they should be primed prior to any sealant application.
- The sealant is soluble in water in wet/uncured state and cannot be used submerged or in rain. Applied sealant must not be sprayed with water or other fluids before skin formation ( <30 min).
- The sealant should not be used outdoors due to the design of the curing process technology
- Very narrow seals cure faster than normal. There is a special version of IPT that cures more slowly
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions . We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
FR-IPT
Be the first to ask a question about this product!