Protecta FR Pipe Wrap maintains fire resistance of fire-separating drywalls, masonry or concrete walls and concrete floors up to 240 minutes when these are breached by services such as plastic pipes, conduits or metal pipes with continuous combustible insulation.
Important!
Protecta FR Pipe Wrap, part of the Protecta Firestopping range, maintains the fire resistance of fire-separating walls and floors up to 240 minutes when these are breached by services such as plastic pipes, conduits or metal pipes with continuous combustible insulation, and may be used in drywalls, masonry or concrete walls and concrete floors.
Each intumescent pipe wrap consists of a graphite based reactive strip, which reacts to heat and expands, closing the opening left by the softening plastic pipe or pipe insulation in a fire. The pipe wrap is easily installed completely around the pipes or insulation and secured with the self- adhesive tab. The annular space around the pipe wrap is sealed with Protecta EX Mortar or Protecta FR Board.
By preventing the spread of smoke and fire, lives can be saved and damage to property kept to a minimum, helping aid evacuation of personnel and giving time for emergency services to arrive and tackle the blaze. Pipe wraps are just a part of fire-stopping compartmentalisation, keeping fires contained in an area for a specified time and preventing them from breaching walls and floors, spreading through service holes to block emergency exits and weaken a structure.
Protecta FR Pipe Wrap come in two different types; ready made for most common diameters and in 25 metre rolls for all diameters. Please check pack sizes before ordering.
| Reference | Product Name | Size | Colour | Pack Size |
|---|---|---|---|---|
| P068 | Protecta FR Pipe Wrap | 50mm wide x 197mm Long (for 55mm Diameter Pipes) | Dark Grey | Box of 25 |
| P076 | Protecta FR Pipe Wrap | 50mm wide x 283mm Long (for 82mm Diameter Pipes) | Dark Grey | Box of 25 |
| P069 | Protecta FR Pipe Wrap | 50mm wide x 370mm Long (for 110mm Diameter Pipes) | Dark Grey | Box of 25 |
| P074 | Protecta FR Pipe Wrap | 50mm wide x 440mm Long (for 125mm Diameter Pipes) | Dark Grey | Box of 20 |
| P075 | Protecta FR Pipe Wrap | 50mm wide x 574mm Long (for 160mm Diameter Pipes) | Dark Grey | Box of 12 |
| P077 | Protecta FR Pipe Wrap | 75mm wide x 711mm Long (for 200mm Diameter Pipes) | Dark Grey | Each |
| P083 | Protecta FR Pipe Wrap | 75mm wide x 869mm Long (for 250mm Diameter Pipes) | Dark Grey | Each |
| P141 | Protecta FR Pipe Wrap | 75mm wide x 1109mm Long (for 315mm Diameter Pipes) | Dark Grey | Each |
| P276 | Protecta FR Pipe Wrap | 50mm Wide x 25m Long | Dark Grey | Each |
| P277 | Protecta FR Pipe Wrap | 75mm Wide x 25m Long | Dark Grey | Each |
| P099 | Protecta FR Pipe Wrap | 50mm Wide x 25m Long (With Adhesive) | Dark Grey | Each |
| P106 | Protecta FR Pipe Wrap | 75mm Wide x 25m Long (With Adhesive) | Dark Grey | Each |
| Technical Approval | ETAG 026-2 |
| Durability according to ETAG 026-2 | Z 2 intended for use in internal conditions with humidity classes other than Z 1, excluding temperatures below 0°C. |
| Conditioning procedure | EN 13238:2010 |
| Expansion ratio | 28:1 |
| Expansion pressure | 55 N |
| Graphite weight | 1.3 kg/m² per mm thickness |
| Graphite density | 1300 kg/m³ |
| Normal expansion time | Less than 10 minutes |
| Minimum expansion temperature | 150°C |
| Storage | Store in temperatures between 5°C and 30°C |
| Life Under normal conditions | 30 years+ |
Installation
For Installation Instructions please see Protecta FR Board and EX Mortar.
| Description | Sound reduction |
|---|---|
| Pipe Wraps installed in FR Board | 55 dB RW |
| Pipe Wraps installed in EX Mortar | 64 dB RW |
The sound insulation value is only valid for the fire seal and not for other elements in the building construction. The sound insulation has been tested by the accredited laboratory Exova BM Trada in Great Britain according to EN ISO 10140-2. Test report is available upon request
When testing pipes, one can choose not to cap (or close) the pipe, or cap the pipe inside the furnace, or outside the furnace, or on both sides. The configuration chosen depends on the intended application of the pipe and/or the installation environment. The code defining if a pipe is capped is stated after the fire classification. For instance EI 60 C/U which means the pipe was capped inside the furnace, and uncapped outside the furnace. The test configuration defines the approvals possible.
Suggestions for engineering judgments are:
| Intended use of pipe | Pipe end condition | |
|---|---|---|
| Rainwater pipe | At roof | C/U (1) |
| Further below | C/C (2) | |
| Drainage or sewage pipe | At drainage | C/U (1) |
| Further below | C/C (2) | |
| Pipes in closed circuits (water, gas, vacuum systems, el. etc.) | C/C (2) | |
| Pipes with open ends and at least 50cm pipe on both sides | U/U | |
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions . We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Protecta FR Pipe Wrap is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Protecta FR Board, designed to prevent the spread of fire & smoke through openings in fire rated walls & floors with multiple installed building services. Permanently flexible, it will maintain the acoustic design performance in fire rated walls & floors, accommodating movements during fire & smaller movements in the...
£26.09 (incl. VAT)
£21.74 (ex. VAT)
A highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca, steel & plastic....
£16.40 (incl. VAT)
£13.67 (ex. VAT)
