Sikacryl-621 Fire Resistant Interior Sealant

573015

Sikacryl-621 Fire restores the fire resistance performance of a floor or wall which incorporates penetration services or linear seals. The extremely versatile 1-part product is ready to use and easy to apply, providing acoustic insulation and up to 4 hours fire resistance.

**Available for delivery - see Delivery Options below**

Colour
Item
£25.74
VAT excluded

£30.89 Tax incl.
Quantity

Description

Sikacryl-621 Fire is a fire resistant, phthalate-free acrylic sealant for interior joints and penetration sealing in walls and floors. Can be combined with SikaSeal-623 Fire, Sikacryl- 624 Fire, SikaSeal-626 Fire Board, SikaSeal-627 Fire Collar, SikaSeal-628 Fire Wrap and SikaSeal-629 Fire Wrap.

The extremely versatile 1-part product is ready to use and easy to apply, providing acoustic insulation and up to 4 hours fire resistance.

Packaging Colour Article Code
300 ml Cartridge, 12 pc/box White 573015
600 ml Foil, 12 pc/box White 573016



Quick Links - Click To Jump To Section:




Features & Benefits




Environmental Information


  • Conformity with LEED v4 EQc 2: Low-Emitting Materials
  • VOC emission classification GEV-EMICODE EC 1 PLUS



Approvals/Standards


  • CE Marking and Declaration of Performance to EN 15651-1 - Sealants for non-structural use in joints in buildings - Facade elements
  • CE Marking and Declaration of Performance to European Technical Assessment ETA 18/1051, based on EAD 350141-00-1106:2017 - Fire stopping and fire sealing products, linear joint an gap seals
  • CE Marking and Declaration of Performance to European Technical Assessment ETA 18/1052, based on EAD 350454-00-1104:2017 - Fire stopping and fire sealing products, penetration seals
  • Fire Protection of Movement Joints BS 476, EN 1366-3, EN 1366-4, Sikacryl-621 Fire, Warringtonfire, Approval No. CF 5718
  • Fire Reaction, Flow Resistance, Elongation at Break, Durability tests EN 15651-1, Sikacryl-621, Sika, Test report No. 00002-CS&B-00554-Mri
  • Fire Resistance Performance Classification EN 13501-2, Sikacryl-621 Fire, Warringtonfire, Classification report No. 401159/A
  • Fire Sealant for Fire Stopping EN 1366-3, EN 1366-4, 13501-2, ETAG 026-2, ETAG 026-3, Sikacryl-621 Fire, UL, Certificate No. UL-EU-01090-CPR
  • Certifire
  • EN 10140-2
  • UL EU



Product Information


Product Information
Chemical Base Acrylic dispersion
Shelf Life 18 months from the date of production.
Storage Conditions The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
Density ~1,60 kg/l (ISO 1183-1)



Technical Information


Technical Information
Resistance to fire Refer to 'Approvals/Standards', Sika Passive Fire Protection Handbook or contact Sika/Rawlins Technical Services for specific information.
Service Temperature −20 °C min. / +70 °C max.
Joint Design Refer to 'Approvals/Standards', Sika Passive Fire Protection Handbook or contact Sika/Rawlins Technical Services for specific information.



Application Information


Application Information
Backing Material Refer to 'Approvals/Standards', Sika Passive Fire Protection Handbook or contact Sika/Rawlins Technical Services for specific information.
Sag Flow ~0 mm (20 mm profile, 50 °C) (ISO 7390)
Ambient Air Temperature 5 °C min. / 40 °C max.
Substrate Temperature 5 °C min. / 40 °C max., min. 3 °C above dew point temperature
Skin Time ~10 min (23 °C / 50 % r.h.) (CPQ 019-1)

 

Resistance to fire of vertical linear joints in rigid and flexible walls sealed with Sikacryl-621 Fire. Movement ± 7.5%. Tested acc. EN 1366-4 and classified acc. EN 13501-2/EAD 350141-00-1106.

Substrates Wall thickness (mm) Configuration Joint width (mm) Joint depth (mm) Resistance Class
Concrete* / Concrete ≥ 100 3 8 - 20 10 EI 45, E 120
≥ 100 3 8 - 50 25 EI 60, E 120
≥ 150 1 8 - 50 20 EI 120, E 240
≥ 150*** 2 8 - 50 5 EI 120, E 240
≥ 150 1 8 - 50 25 EI 240
Concrete* / Steel ≥ 100 3 8 - 20 10 EI 20, E 120
≥ 100 3 8 - 50 25 EI 30, E 45
≥ 150**** 1 8 - 50 30 EI 60, E 240
Concrete* / Softwood ≥ 100 3 8 - 20 10 EI 20, E 30
≥ 100 3 8 - 50 25 EI 45
≥ 150**** 1 8 - 50 30 EI 60
Gypum walls**/ Concrete* ≥ 120 4 8 - 20 12.5 EI 120
≥ 120 1 8 - 20 12.5 EI 120

* Brickwork, concrete or aerated concrete with a density ≥ 670 kg/m3

** 2 Layers of gypsum board (2 x 1.5 mm on each side)

*** Backed with ≥ 60 kg/3 mineral wool, ≥ 75 mm deep

**** Backed with ≥ 45 kg/3 mineral wool, ≥ 40 mm deep

 

Resistance to fire of linear joints in floors as well as head of walls (wall thickness ≥ 150 mm) sealed with Sikacryl-621 Fire. Movement ± 7.5%. Tested acc. EN 1366-4 and classified acc. EN 13501-2/EAD 350141-00-1106.

Substrates Configuration Joint width (mm) Joint depth (mm) Resistance Class
Concrete* / Concrete 3/6 8 - 20 10 EI 45, E 240
3/6 8 - 50 25 EI 90, E 240
1/4 8 - 50 20 EI 120, E 240
2/5 8 - 50 5*** EI 120, E 240
Concrete* / Steel 3/6 8 - 20 10 EI 20, E 120
3/6 8 - 50 25 EI 90, E 240
Concrete* / Softwood 3/6 8 - 20 10 EI 30
3/6 8 - 50 25 EI 45

* Brickwork, concrete or aerated concrete with a density ≥ 760 kg/m3

*** Backed with ≥ 60 kg/3 mineral wool, ≥ 75 mm deep



Application Instructions


Substrate Preparation

The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Sikacryl-621 Fire adheres without primers and/or activators.

 

Backing

Sikacryl-621 Fire may adhere to only two sides of the joint in order to perform properly. The bottom surface of the sealant must be free to deform. If the bottom of sealant adheres, the sealant will rupture during deformation. Backing rods are used to avoid adhesion to the joint’s bottom and to limit its depth.

In most cases, closed cell PE backers are used in combination with Sikacryl-621 Fire - for specific cases, refer to the relevant classification reports, ETA’s or similar.

To provide sufficient backpressure during sealant application, the backing rod should be ~25% larger than the joint width. Sizing differs among backing rod types; refer to the manufacturer’s recommendations.

 

Application Method/Tools

IMPORTANT: The sealant must fill the entire joint or cavity and be in full contact with the joint sides. If the joint is improperly filled, good adhesion will not be achieved, and the joint’s performance will be weakened.

Reference must be made to the Sika Passive Fire Protection Handbook or contact Sika/Rawlins Technical Services for additional information on 0113 2455450 (option 2) or send a message to [email protected] .

 

Cleaning of Tools

Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically.



Further Documents




Limitations


  • Sikacryl-621 Fire can be overpainted. However, paints must first be tested to ensure compatibility by carrying out preliminary trials (e.g. according to ISO technical paper: Paintability and paint compatibility of Sealants).
  • Colour variations may occur due to exposure to chemicals, high temperatures and/or UV-radiation (especially with the colour shade white). However, a change in colour is purely of aesthetic nature and does not adversely influence the technical performance or durability of the product.
  • Do not use Sikacryl-621 Fire as a glass sealant, for floor joints, sanitary joints, on natural stone, or for civil engineering applications.
  • Do not use Sikacryl-621 Fire on bituminous substrates, natural rubber, EPDM rubber or on any building materials which might leach oils, plasticizers or solvents that could attack the sealant.
  • Do not use Sikacryl-621 Fire for joints under water pressure or for permanent water immersion.

 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
573015

Data sheet

Manufacturer
Sika
Interior / Exterior Use
Interior
Water / Solvent Based
Water
Application Method
Caulking Gun
Single, Two or Three Pack
Single
Base Type
Acrylic dispersion
Recommended Thinner/Cleaner
Water
Max. Application Temperature
40 °C
Density
~1,60 kg/l (ISO 1183-1)
Shelf Life (from date of manufacture)
18 months
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

SikaSeal-623 Fire Resistant Intumescent Sealant

SikaSeal-623 Fire, a fire resistant, intumescent graphite based sealant for interior penetration seals, restoring the fire resistance performance of a floor or wall which incorporates combustible services like soil and vent pipes or cables. Part of the Sika Passive Fire Protection range Designed to provide a high volume expansion and...

Price £71.46
In stock

Sikacryl-624 Fire Resistant Acrylic Sealant

Sikacryl-624 Fire, a 1-part, fire resistant, acrylic sealant/coating for large gaps and joints in floors and floor/wall intersections in combination with mineral wool backing. It restores the fire resistance performance (up to 3 hours, in combination with mineral wool) of cavity barriers and joints at floor and wall intersections. Part of...

Price £310.53
In stock

SikaSeal-626 Fire Board

SikaSeal-626 Fire Board, a mineral wool based protection board coated with the fire resistant, ablative coating Sikacryl-625 Fire on both sides providing up to 4 hours fire resistance for sealing a wide range of service penetrations. Part of the Sika Passive Fire Protection range For face fit (pattress-fit) and internal-fit installations...

Price £819.90
In stock

SikaSeal-627 Fire Collar

SikaSeal-627 Fire Collar, a prefabricated pipe collar for interior and exterior penetration sealing applications, providing up to 4 hours fire resistance in floors or walls which incorporate service openings containing metallic, plastic or composite pipes, conduits or other services. Part of the Sika Passive Fire Protection range Pipe...

Price £22.26
In stock

SikaSeal-628 Fire Wrap Pre-Cut Intumescent Strips

SikaSeal-628 Fire Wraps, ready to use, pre-cut strips for pipe diameters from 32mm to 250mm. Highly intumescent, use to restore the fire resistance performance (for up to 4 hours) of a floor or wall which incorporates interior or exterior service openings containing plastic or composite pipes. Part of the Sika Passive Fire Protection...

Price £59.10
In stock

SikaSeal-629 Fire Wrap Intumescent Roll Strip

SikaSeal-629 Fire Wrap, a fire resistant pipe wrap on a roll for interior and exterior penetration sealing applications, designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings. Part of the Sika Passive Fire Protection range Restores the fire...

Price £139.44
In stock