Quick Links - Click To Jump To Section:

• Fire Rating
• Examples of Projects
• Test Data

Fire Rating

1 Seal Required

When installing in gaps/joints in floors, product must be installed 25mm down from the top of the floor slab.

When installing in walls, the product must be installed centrally.

• Minimum Floor Slab Depth: 150mm
• Minimum Wall Depth: 100mm
• Tested to EN 1366-4: 2021
• NB. Test evidence does not cover applications at the Head of Wall

2 Seals Required

When installing in gaps/joints in floors, top seal must be installed 100mm down from the top of the floor slab with an air gap of 50mm between the top and bottom seal.

When installing in walls, the 2no. seals must be installed centrally with a 50mm air gap between the seals. Butt joints in adjacent seals must be offset by minimum 500mm.

• Minimum Floor Slab Depth: 250mm
• Minimum Wall Depth: 250mm
• Tested to EN 1366-4: 2006 +A1 2010
• NB. Test evidence does not cover applications at the Head of Wall

In all cases:

• Substrates covered include aerated concrete, concrete, blockwork and masonry separating elements (floors and walls) of a thickness and density equal to or greater than 670kg/m³
• All butt joints must be a very tight friction fit with no gaps

Examples of Projects

Student Accomodation:

• Student Castle, Manchester
• Downing Plaza, Newcastle
• Holyrood, Edinburgh
• Eastern Boulevard, Leicester
• College Lane, Hatfield
• Wallscourt Park, UWE

Hotels/Commercial

• Hotel Football, Old Trafford
• BBC Media City, Salford
• Premier Inn, Multiple Locations

Residential

• Berkshire House, Maidenhead
• Commonwealth Games, Glasgow
• One Tower Bridge, London
• Anglican Retirement Village, Castle Hill, Sydney

Medical and Healthcare

• RLUH — Royal Liverpool University Hospital
• Oncology Hospital, Palermo, Italy

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.