Tenmat FF108 Cable Basket Fire Sleeves offer a quick and simple way to maintain the fire and acoustic ratings of cable basket penetrations. The compressible and fully intumescent material provides an effective fire and acoustic seal around both the cables and the cable basket itself. The Sleeves have been fire tested to BS 476: Part 20 and acoustically tested in accordance with BS EN ISO 140-3:1995 and BS EN ISO 717-1:1997.

The Cable Basket Fire Sleeves are supplied in a standard length to suit all common wall constructions. The ready to install design does not require any additional metal work, support, fire rated sealants or foams.

The use of Cable Trays and Cable Baskets is on the increase as the amount of cabling within buildings continues to grow. Cables are routed through a wide variety of building types including hospitals, apartments and hotels.

All buildings have walls and floors with fire and acoustic ratings. When cables are installed through such constructions their integrity and ability to perform to the required fire and acoustic standards are significantly reduced.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Ordering References
• General Fitting Instructions
• Test Data

Features & Benefits

• 2 hours Fire Rated
• BS 476: Part 20
• Acoustically tested in accordance with BS EN ISO 140-3:1995 and BS EN ISO 717-1:1997
• Acoustically rated
• Simple to install
• No mastic, screws, or metal sleeving required
• Can be fitted prior to running cables
• Firestops both the cable basket and cables

Ordering References

General Fitting Instructions

• Use the Fire Sleeve as a template when cutting the plasterboard to provide a snug fit around the Fire Sleeve
• Slit the sleeve along its length to allow easy installation around cable tray or basket

• Fit sleeve around tray or basket and re-seal with aluminium repair tape supplied

• Once cables have been installed they should be tightly sealed with TENMAT Infill Material

• If required, an intumescent sealant can be used to ensure a smoke and acoustic seal
• Installation in solid walls is also approved

Test Data

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.