Intumescent pipe wraps for fire stopping all types of plastic pipes passing through masonry floors and walls. The wraps have been independently fire tested to EN 1366-3 and BS 476 giving a fire resistance of up to 4 hours. Tested in block, concrete and masonry walls and concrete floors.

Designed to provide high volume expansion and pressure sealing using an intumescent composition based on elastomeric thermoplastic polymers and binders. On exposure to fire the pipe wrap expands rapidly inwards to fill the void left by the collapsing plastic pipe until the aperture is completely sealed.

Tested with pipes up to 200mm diameter including PVC, PP, MDPE, HDPE and ABS types.

Astroflame Intumescent Pipe Wraps are economical, unaffected by moisture, humidity or frost and easy to fit, but care should be taken when fitting to avoid damaging the outer polythene sleeve.

The product is based on an thermoplastic composite and is non-toxic, Halogen free, contains no asbestos, ceramic, mineral fibres and is mould resistant.

• Intumescent Pipe Wraps for PVC, PP, MDPE, HDPE and ABS pipes up to 200mm.
• Fire resistance testing to EN 1366-3 EI 120 and BS 476 240mins.
  • Note that AFIPW200/2E - Intumescent Pipe Wrap - 200mm is fire rated up to 120 minutes
• Suitable for wall and floor installation.
• Tested in Block Wall, Concrete and Masonry.
• Tested in Concrete Floors.
• Long life and is easy to use.
• Certifire 3rd Party Accreditation.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.