Promat Promaseal Intu Collars are used to seal plastic and insulated metal pipe penetrations installed in a wide variety of substrates including flexible and rigid walls, rigid floors and in the Promaseal Fire Barrier system.
Supplied pre-assembled, available in variety of sizes 55 - 160mm
Promat Promaseal Intu Collars are used to seal plastic and insulated metal pipe penetrations installed in a wide variety of substrates including flexible and rigid walls, rigid floors and in the Promaseal Fire Barrier system.
Installation:
Ensure that the aperture and services in question have been tested with Promaseal Intu Collars and the site conditions are within the application specification. Services to be rigidly supported maximum 400mm from the seal on both sides of the wall and floor
All services and apertures need to be clean and clear of all dust and loose particles. The aperture temperature needs to be at +5°C or above at time of installation
An annular space (max 10mm annular) needs to be present around the service to apply sufficient installation depth of Promaseal Intumescent Acrylic Sealant
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Promat Promaseal Intu Collar is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product, but can recommend FSi Stopseal 50 - FB12500DP48 - Stopseal 50 - 1200 x 600 x 50mm Double Coated Batt as a great alternative. Promat Promaseal Fire Barrier 50mm is a thick lightweight mineral fibre slab with a white endothermic, ablative coating applied on both sides of the slab. Fire Barrier slabs are used to...