Nullifire FJ203 Fire Resistant Backer Rod is a firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.
Nullifire FJ203 Fire Resistant Backer Rod is a firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.
FJ203 can be used alone or in combination with silicone sealant FS703, for fire sealing expansion joints up to 240 minutes (4 hours), for joint widths from 10 to 50mm, in wall and slab (see Efectis classification according to NF EN 13501-2).
Used to make fire-resistant expansion joints between masonry elements
Ideal for use in hospitals, hotels, car parks, schools, airports, nuclear power plants etc
Classification reports for fire resistance up to 240 minutes (4 hours) according to NF EN 13501-2
For joint widths from 10 to 50mm
High regularity
Packaged in long coils
Good cohesion, easy to cut
Movement capacity up to 20% (tested during fire test)
Instructions For Use
The substrates must be solid, dust-free, degreased and free of anti-adherent agents
Select the backer rod diameter according to the width of the seal - see Ordering References
Apply the adhesive FO142 with a brush or FO143 in a cartridge on the lips of the joint
Position the FJ203 on the fresh glue, compressing it into the joint
When covering with a silicone sealant, the positioning of the backer rod should make it possible to respect the following ratio:
Depth = Width / 2
For details on the application of FS703 Sealant, refer to the Technical Data Sheet
Ordering References
Joint Width
Item/Size
10mm
352069 - 15mm x 50m Roll (non stock item - 14 working days lead time)
11-14mm
500750 - 20mm x 50m Roll
15-20mm
500751 - 30mm x 50m Roll
21-25mm
500752 - 40mm x 50m Roll
26-30mm
500753 - 50mm x 25m Roll
31-40mm
500754 - 60mm x 25m Roll
41-50mm
500755 - 70mm x 20m Roll (non stock item - 14 working days lead time)
Technical Data
Characteristics
Values
Temperature Resistance
Continuous: + 600°C Peak : + 800°C
Manufacturing Tolerance For Diameters
10% in diameter 15, 20, 30, 40 mm 5% for diameter 50, 60, 70 mm
Consumption of glue (to glue the 2 sides of the joint)
Nullifire FO142 - From 20 to 80 ml per linear metre depending on the joint cross section (by volume) / i.e. 28 to 112 g / linear meter (by weight)
Nullifire FO143 - From 20 to 80 ml per linear metre depending on the joint cross section (by volume) / i.e. 38 to 152 g / linear meter (by weight)
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Nullifire FJ203 Fire Resistant Backer Rod is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Nullifire (Firetherm) FO142 Intutac bonds structural steel and ductwork protection boards in internal situations.Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970More Information Delivery Info
Nullifire (Firetherm) FS703 Intusil Fire Resistant Silicone Sealant, a fire-stopping sealant designed for aggressive exterior use on high-sheen surfaces (glass, aluminium) and in high-movement joints for up to 50% movement. Suitable to fire seal joints incompartment walls and floors such as masonry to masonry, masonry to timber, masonry to...
Nullifire FO143 Intutac Gun Grade Silicate Adhesive is a silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry.Up to 240 minutes fire resistance Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre...