Hensel Hensomastik K 2000 Special Adhesive is a flexible special adhesive. It bonds fire-protection boards with additional mechanical fixing, serves as an installation aid when working with insulating materials and assists when bonding and sealing fire-protection boards for the construction of ventilation systems. It is available in two grades 'Viscous' for trowel and roller application, and 'Spray Grade' for airless spray application.

Hensel Hensomastik K 2000 Special Adhesive is heat resistant up to +750 °C and its high degree of elasticity makes it suitable for joining materials with very different coefficients of thermal expansion. Hensomastik K 2000 is therefore used in the construction of railway carriages to fix insulating material between exterior sheet metal panels and interior cladding, for example.

It can also be used for bonding fireproof boards to concrete or aerated concrete with additional mechanical fastening.

Part of the Hensel fire stopping range. 

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Classifications
• Notes

Features & Benefits

   
• Classified in accordance with DIN EN 13501-1 as A2-s1, d0 when 400 g/m² are applied
• Classification in accordance with DIN EN 45545-2
• Organic material, permanently flexible – which does not become brittle
• Heat resistant up to +750 °C
• Solvent-free
• Colourless
• High degree of elasticity makes it suitable for joining materials with very different coefficients of thermal expansion
• Used in the construction of railway carriages to fix insulating material between exterior sheet metal panels and interior cladding, for example
• Bonding of fireproof boards to concrete or aerated concrete with additional mechanical fastening
• Ideal for fixing and sealing of fireproof boards for ventilation ducts
• Installation aid for the processing of insulation materials
• Building material classification A2 (non-combustible)
• Available in a choice of 'Viscous' for trowel and roller application or 'Spray Grade'

Classifications

• Classification according to DIN EN 13501-1, A2 – s1, d0 this corresponds with DIN 5510-2: S5, SR2, ST2
• Classification Report No. FLT KE4197908
• Classification according to UNE 23721: class M1
• Fulfils the requirements of R1 HL3 according to EN 45545-2:2016
• Exova Warringtonfire Test Report No. 2014-2265-1

Notes

• If materials of different densities are used, the adhesive must be applied onto the material with the higher density
• Before joining parts, especially overhead or vertically, an 8 to 20 minutes interval of airing is recommended to guarantee an instant fixing

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.