Rockwool Softseal Lamella Single Coated Coated Linear Strips

    289903
    ROC9748

    Part of the Rockwool Firepro range, Firepro Softseal Lamella Single Coated Linear Strips - previously Rockwool Firepro SoftSeal Linear Joint Seal - incorporates a product specifically designed to accommodate movement within buildings in linear joint seals.

    • Acoustically absorbent
    • CE Marked
    • Easy to handle and install
    • Both vertical and horizontal joint applications
    • Tested for durability to current EU guidelines
    • Supplied pre-coated
    • Provides up to 4 hours* fire performance (E240 & EI80)

    Size
    £9.39(ex. VAT)
    £11.27 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    The Rockwool Firepro SoftSeal System has been developed in response to demand from the market for a firestopping solution where high levels of movement in the building’s services or joints need to be accommodated. The system is suitable for applications in linear joint seals.



    Quick Links - Click To Jump To Section:




    Applications


    • As part of the comprehensive Firepro range of fire protection products, Softseal incorporates a product specifically designed to form a linear joint seal within buildings, where the design needs to accommodate movement in the joint
    • It may be installed horizontally or vertically and is suitable for linear joint widths up to 200mm
    • Can also be used as a ‘head-of-wall’ barrier to extend the fire resistance and acoustic performances of masonry walls that finish at suspended ceiling height, up to the concrete soffit above
    • Can be used in conjunction with Rockwool Ablative Coated Batt for head-of-wall applications.
    • Comprises a low-density stone wool Firepro SoftSeal batt, pre-coated with Firepro SoftSeal Flexible Coating
    • Depending on the application, strips can be supplied on either one or both sides. (Single Sided for Horizontal Applications. Double sided for Vertical Applications)
    • Supplied in strips 1200mm x 200mm x 100mm



    Performance


    Fire performance

    • Tested to the dedicated fire resistance standard for linear joint seals BS EN1366-4 and shown to provide up to 4 hours* fire performance (E240 & EI80)
    • Certified by UL and CE marked to EAD 350141-00-1106

    *Subject to application.

    Movement

    As part of the testing to BS EN 1366-4, Firepro SoftSeal was assessed for its movement capabilities, prior to conducting the
    fire test. The product was tested to accommodate movement (expansion and contraction) of +/-25%.

    Acoustics

    Tested to EN 10140 based on two thicknesses with the following results:

    • Rw 30 dB: When installed with 100mm thick SoftSeal Batt
    • Rw 39 dB: When installed with 200mm thick SoftSeal Batt
    • Dn,e,w 40 dB: When installed with 100mm thick SoftSeal Batt
    • Dn,e,w 49 dB: When installed with 200mm thick SoftSeal Batt

    Water Permeability

    Tested to EN 1027 - No leakage observed up to 300Pa.

    Air Permeability

    • Tested to EN 1026 up to 600Pa
    • Leakage at 50Pa - 0.1/1.4 m³/m²/h



    Installation


    • Please see Product Data Sheet and Installation Guide for detailed installation instructions.
    • Measure the width of the Linear Joint to be sealed
    • Cut the strips up to 25% bigger than the joint width, so when installed they are under compression
    • Ensure substrate is clean and free of dust and debris
    • Install the strip with the coating on the top surface
    • Apply Firepro SoftSeal Flexible Coating to the face of all joints between the seal and the substrate, overlapping by 20mm
    • Apply Firepro SoftSeal Flexible Coating to the faces of all butt joints between pieces of Soft Seal Linear Joint Seal



    IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.



    Product Details
    9748-968917

    Data sheet

    Manufacturer
    Rockwool
    For Use By
    Professional Use
    Interior / Exterior Use
    Interior Use
    For Use On
    Penetration seals, linear joint seals
    Single, Two or Three Pack
    Single
    Pack Size
    100mm x 200mm x 1200mm
    Density
    80Kg/m³
    Suitable For Use On
    Penetration Seals
    Suitable For Use On
    Linear Joint Seals
    Manufacturer
    Rockwool
    Product Usage Type
    Slab
    Product Range
    Softseal
    Fire Rating
    240 Minutes
    Fire Rating
    180 Minutes
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Rockwool Softseal Lamella Single Coated Coated Linear Strips is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Rockwool 50mm Ablative Coated Batt

    The Rockwool 50mm Ablative Coated Batt comprises a high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void...

    Price £21.98 (ex. VAT)
    In Stock and Available for Delivery

    Rockwool 60mm Ablative Coated Batt

    The Rockwool 60mm Ablative Coated Batt comprises a high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void...

    Price £25.86 (ex. VAT)
    In Stock and Available for Delivery