All surfaces should be clean, dry and free from contamination.
Envirograf HW Acrylic Top Coat can be applied by brush, roller or spray. It can be thinned with up to 5% with clean water. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
In most instances apply 2 coats @ 12m² per litre.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Flame Retardant Topcoat is an oil based, decorative flame-retardant paint used to decorate and complete Thermoguard fire protection upgrading systems.
Oil-based, decorative eggshell or gloss finish with colour options
BS476 Part 7; Class 1 surface spread to flame
BS476 Part 6; Fire propagation
Designated Class 0...
Bollom Flameguard Ultra Primer/Undercoat is for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces.
Seals porous surfaces
Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.
Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces:
Can be applied by brush, roller or spray
Available in matt, satin or gloss finishes
Can be used over Envirograf QVFR Clear Fire Protection Coating
Envirograf ENV/HS High-Density Clear Lacquer is for use over Envirograf HW02E Clear Intumescent Coating, ES/VFR Clear Fire Protection Coating or QVFR Clear Fire Protection Coating in areas that are subject to high wear.
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel.
Hard wearing vinyl matt finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
Thermoguard Wallcoat Smoke & Flame Retardant Topcoat is a fire-retardant paint for walls and ceilings.
Works in combination with Thermoguard Wallcoat Basecoat
Controls surface spread of flame and fire propagation
Total smoke control
Stops flaming droplets and particulates to BS EN Class B s1 d0
Huge colour options
PPG Steelguard 2458 is a one-component, solvent-borne acrylic finish coat for SteelGuard intumescent coatings.
Finish coat for SteelGuard intumescent coatings
Good gloss and color retention
Resistant to water and splash of mild chemicals
Nu-Flame AG Glaze acts as the final coat to the Nu-Flame Fire Protection Coating for walls and ceilings, and may also be used to overcoat matt emulsion or masonry paint. Also specially formulated to act as an anti-graffiti coating.
Fire retardant and anti graffiti
Water-soluble and non toxic
Easy to clean
Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating:
Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell or solvent-based gloss finish
High coverage rates
Wide colour range options...
Envirograf HW Superb Clear Top Coat is a tough, long lasting, extra hard wearing solvent based top coat that offers a superb robust and easy to clean surface. This coating offers excellent UV protection and is available in Matt, Satin or Gloss finishes.
Envirograf QVFR Premier Plus Top Coat is a coloured, water-based, hard wearing top coat:
Offers a superb finish for application over Envirograf QVFR White Fire Protection Coating
Available in matt, satin or gloss finishes
Designed as a high quality INTERNAL coating for general use
Ready to use, and does not need thinning