Envirograf ES/VFR Translucent Top Coat is supplied ready for use and does not need thinning.
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre
(Ensure end grain is treated with each coat)
Preparation and Application
All surfaces should be clean, dry and free from contamination.
Envirograf ES/VFR Translucent Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Wallcoat Smoke & Flame Retardant Topcoat is a fire-retardant paint for walls and ceilings.
Works in combination with Thermoguard Wallcoat Basecoat
Controls surface spread of flame and fire propagation
Total smoke control
Stops flaming droplets and particulates to BS EN Class B s1 d0 (as part of a complete...
Nu-Flame Steel Top Coat is a flame retardant coating for internal and external steel and cast iron. Resistant to physical damage, it is also great for use in spaces that are used frequently.
For steel and cast iron.
Extend lifespan for up to 50 years.
Gloss and semi gloss finishes.
Envirograf HW Premier Top Coat is a coloured, water-based product to apply over Envirograf HW01 White Intumescent Coating with no need for an undercoat:
Available in matt, satin or gloss finishes
For internal use only
Apply one coat at 10 - 12m² per litre
Envirograf QVFR Premier Plus Top Coat is a coloured, water-based, hard wearing top coat:
Offers a superb finish for application over Envirograf QVFR White Fire Protection Coating
Available in matt, satin or gloss finishes
Designed as a high quality INTERNAL coating for general use
Ready to use, and does not need thinning
Envirograf HW Excel Top Coat is a solvent based product to apply over Envirograf HW01 White Intumescent Coating:
No need for an undercoat
Available in Satin or Gloss finishes
Gives a high quality durable finish for internal & external use
Suitable for use on all types of timber substrate
Envirograf HW Ultimate Top Coat is a premium quality, satin sheen, coloured finish for the use over Envirograf HW01 White Intumescent Coating:
Suitable for interior and exterior use on wood
High opacity finish
Quick drying and non-yellowing
A flame retardant top coat developed specifically for external walls and is tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Perfect for use on external warehouse and industrial outlet walls to minimise potential damage in hazardous environments.
For use on...
Envirograf HW/AG Clear Anti-Graffiti Coating is a clear, quick-drying coating which protects against graffiti of all kinds. Used in conjunction with Envirograf fire protection coatings offers BS476 Class 0 & 1 spread of flame.
Envirograf HW Superb Clear Top Coat is a tough, long lasting, extra hard wearing solvent based top coat that offers a superb robust and easy to clean surface. This coating offers excellent UV protection and is available in Matt, Satin or Gloss finishes.
Bollom Flameguard Ultra Primer/Undercoat is for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces.
Seals porous surfaces
Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating:
Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell or solvent-based gloss finish
High coverage rates
Wide colour range options...
Envirograf HW Excel Clear is a flame-retardant varnish topcoat that is used as part of an intumescent Envirograf system for timber:
Matt, satin or gloss finishes available
Internal use only
For use over Envirograf HW02E Clear Intumescent Coating
Apply by brush or roller
Envirograf HW/CRC Top Coat is a chlorinated rubber top coat for use over Envirograf HW02E Clear or HW01 White Intumescent Coatings in areas of high humidity:
Heavy duty single pack coating for use in difficult areas
Excellent heavy duty protection
Chemical and water resistance
Ideal coating for concrete and steel used in difficult conditions such as...