All surfaces should be clean, dry and free from contamination, with no loose particles.
Apply over Envirograf HW01 White Intumescent Coating with either brush, roller or spray. Do not thin – use straight from the can. However, when applied by spray, up to 10% water may be added. The coating is touch dry in 2 hours.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Envirograf ES/VFR Translucent Top Coat is a spirit based wood stain to apply over Envirograf ES/VFR Clear Fire Protection Coating:
Suitable for internal or external use
Supplied ready for use, and does not need thinning
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre
Envirograf HW Enviro Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces. It can be applied by brush, roller or spray and it comes in either a satin or gloss finish.
Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating:
Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell or solvent-based gloss finish
High coverage rates
Wide colour range options...
Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access.
Seals isolated asbestos fibres
Prevents asbestos release
Permanently bonds asbestos fibres
Available in 12m² or 50m² pack sizes
Bollom Flameguard Ultra Primer/Undercoat is for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces.
Seals porous surfaces
An industrial grade cloth tape which is fire retardant to BS specification. Durable, flexible, and tearable by hand, our Fire Resistant Gaffer Tape is a self extinguishing cloth tape which works in both vertical and horizontal planes which provides a useful solution for isolation of components from fire risk areas.
Envirograf HW Ultimate Top Coat is a premium quality, satin sheen, coloured finish for the use over Envirograf HW01 White Intumescent Coating:
Suitable for interior and exterior use on wood
High opacity finish
Quick drying and non-yellowing
Envirograf HW Acrylic Top Coat is a coloured, water based topcoat:
For use over Envirograf HW01 White Intumescent Coating, ES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating
Designed as a high quality internal coating for general use
Ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc.
Nu-Flame FR Gloss is a gloss flame retardant topcoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant topcoat
Envirograf QVFR UVR Clear Top Coat is a solvent based product:
For application over Envirograf QVFR Clear Fire Protection Coating with no need for an undercoat
Available in Matt, Satin or Gloss finishes
It contains a UV filter for protection against blistering, cracking and peeling
For internal use only
Nu-Flame FR Undercoat is a gloss flame retardant undercoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant basecoat
Envirograf HW Excel Top Coat is a solvent based product to apply over Envirograf HW01 White Intumescent Coating:
No need for an undercoat
Available in Satin or Gloss finishes
Gives a high quality durable finish for internal & external use
Suitable for use on all types of timber substrate
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel.
Hard wearing vinyl matt finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
A flame retardant top coat developed specifically for external walls and is tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Perfect for use on external warehouse and industrial outlet walls to minimise potential damage in hazardous environments.
For use on...