All surfaces should be clean, dry and free from contamination, with no loose particles.
Stir well before application. May be applied using brush or roller. The result is dependent on the condition of the substrate and temperature of application. Do not thin and do not use over polystyrene. Touch dry in 4 – 6 hours. Re-coatable in 16 to 24 hours at 20°C.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Nullifire TS134 Acrylic Polyurethane Top Seal is high-gloss High-Solid polyurethane Topcoat, which can be easily sprayed with conventional as well Airless equipment. Product has excellent flow and application properties which provides a smooth, durable and easy to clean surface.
PPG Steelguard 2458 is a one-component, solvent-borne acrylic finish coat for SteelGuard intumescent coatings.
Good gloss and color retention
Resistant to water and splash of mild chemicals
Envirograf ES/VFR Translucent Top Coat is a spirit based wood stain to apply over Envirograf ES/VFR Clear Fire Protection Coating:
Suitable for internal or external use
Supplied ready for use, and does not need thinning
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre
Nu-Flame AG Glaze acts as the final coat to the Nu-Flame Fire Protection Coating for walls and ceilings, and may also be used to overcoat matt emulsion or masonry paint. Also specially formulated to act as an anti-graffiti coating.
Fire retardant and anti graffiti
Water-soluble and non toxic
Easy to clean
Thermoguard Flame Retardant Floor Paint is a heavy-duty, flame retardant coating for interior concrete floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent...
Envirograf HW Easy-Clean Top Coat is a washable and highly durable, coloured acrylic top coat for coating over Envirograf HW01 White Intumescent Coating:
Matt and Satin finishes available for interior use on walls, ceilings and woodwork
Ideal for use in kitchens, bathrooms, hotels, hospitals and public buildings
Envirograf QVFR UVR Clear Top Coat is a solvent based product:
For application over Envirograf QVFR Clear Fire Protection Coating with no need for an undercoat
Available in Matt, Satin or Gloss finishes
It contains a UV filter for protection against blistering, cracking and peeling
For internal use only
Bollom Flameguard Ultra Gloss is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel.
Hard wearing gloss finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
Envirograf HW Acrylic Top Coat is a coloured, water based topcoat:
For use over Envirograf HW01 White Intumescent Coating, ES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating
Designed as a high quality internal coating for general use
Ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc.
Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access.
Seals isolated asbestos fibres
Prevents asbestos release
Permanently bonds asbestos fibres
Available in 12m² or 50m² pack sizes
Envirograf HW Excel Clear is a flame-retardant varnish topcoat that is used as part of an intumescent Envirograf system for timber:
Matt, satin or gloss finishes available
Internal use only
For use over Envirograf HW02E Clear Intumescent Coating
Apply by brush or roller
Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.
Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces:
Can be applied by brush, roller or spray
Available in matt, satin or gloss finishes
Can be used over Envirograf QVFR Clear Fire Protection Coating
Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02E Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.