Envirograf HW Excel Top Coat is a solvent based product to apply over Envirograf HW01 White Intumescent Coating – no need for an undercoat. Available in Satin or Gloss finishes, it gives a high quality durable finish for internal & external use. Suitable for use on all types of timber substrate.
Preparation and Application
All surfaces to be painted should be clean, dry and free from loose and flaking material. Stir Envirograf HW Excel Top Coat well before and during use. Apply using brush or roller. Envirograf HW Excel Top Coat is supplied ready for use and does not need thinning.
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre per coat
(Ensure end grain is treated with each coat)
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Flame Retardant Topcoat is an oil based, decorative flame-retardant paint used to decorate and complete Thermoguard fire protection upgrading systems.
Oil-based, decorative eggshell or gloss finish with colour options
BS476 Part 7; Class 1 surface spread to flame
BS476 Part 6; Fire propagation
Designated Class 0...
Envirograf QVFR UVR Clear Top Coat is a solvent based product:
For application over Envirograf QVFR Clear Fire Protection Coating with no need for an undercoat
Available in Matt, Satin or Gloss finishes
It contains a UV filter for protection against blistering, cracking and peeling
For internal use only
Nullifire TS134 Acrylic Polyurethane Top Seal is high-gloss High-Solid polyurethane Topcoat, which can be easily sprayed with conventional as well Airless equipment. Product has excellent flow and application properties which provides a smooth, durable and easy to clean surface.
Nu-Flame FR Gloss is a gloss flame retardant topcoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant topcoat
Nu-Flame FR Undercoat is a gloss flame retardant undercoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant basecoat
Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02E Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.
Envirograf ENV/HS High-Density Clear Lacquer is for use over Envirograf HW02E Clear Intumescent Coating, ES/VFR Clear Fire Protection Coating or QVFR Clear Fire Protection Coating in areas that are subject to high wear.
Envirograf HW/CRC Top Coat is a chlorinated rubber top coat for use over Envirograf HW02E Clear or HW01 White Intumescent Coatings in areas of high humidity:
Heavy duty single pack coating for use in difficult areas
Excellent heavy duty protection
Chemical and water resistance
Ideal coating for concrete and steel used in difficult conditions such as...
A flame retardant top coat developed specifically for external walls and is tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Perfect for use on external warehouse and industrial outlet walls to minimise potential damage in hazardous environments.
For use on...
Envirograf HW Superb Clear Top Coat is a tough, long lasting, extra hard wearing solvent based top coat that offers a superb robust and easy to clean surface. This coating offers excellent UV protection and is available in Matt, Satin or Gloss finishes.
Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating:
Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell or solvent-based gloss finish
High coverage rates
Wide colour range options...