Envirograf HW Premier Top Coat is a coloured, water-based product to apply over Envirograf HW01 White Intumescent Coating with no need for an undercoat. Available in matt, satin or gloss finishes, it is for internal use only.
Preparation and Application
All surfaces should be clean, dry and free from contamination.
Envirograf HW Premier Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
Apply one coat at 10 - 12m² per litre.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access.
Seals isolated asbestos fibres
Prevents asbestos release
Permanently bonds asbestos fibres
Available in 12m² or 50m² pack sizes
Envirograf HW Excel Clear is a flame-retardant varnish topcoat that is used as part of an intumescent Envirograf system for timber:
Matt, satin or gloss finishes available
Internal use only
For use over Envirograf HW02E Clear Intumescent Coating
Apply by brush or roller
Envirograf QVFR Premier Plus Top Coat is a coloured, water-based, hard wearing top coat:
Offers a superb finish for application over Envirograf QVFR White Fire Protection Coating
Available in matt, satin or gloss finishes
Designed as a high quality INTERNAL coating for general use
Ready to use, and does not need thinning
Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.
Envirograf QVFR UVR Clear Top Coat is a solvent based product:
For application over Envirograf QVFR Clear Fire Protection Coating with no need for an undercoat
Available in Matt, Satin or Gloss finishes
It contains a UV filter for protection against blistering, cracking and peeling
For internal use only
Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating:
Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell or solvent-based gloss finish
High coverage rates
Wide colour range options...
Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02E Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.
Envirograf ENV/HS High-Density Clear Lacquer is for use over Envirograf HW02E Clear Intumescent Coating, ES/VFR Clear Fire Protection Coating or QVFR Clear Fire Protection Coating in areas that are subject to high wear.
Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces:
Can be applied by brush, roller or spray
Available in matt, satin or gloss finishes
Can be used over Envirograf QVFR Clear Fire Protection Coating
Bollom Flameguard Ultra Gloss is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel.
Hard wearing gloss finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
Nu-Flame Steel Top Coat is a flame retardant coating for internal and external steel and cast iron. Resistant to physical damage, it is also great for use in spaces that are used frequently.
For steel and cast iron.
Extend lifespan for up to 50 years.
Gloss and semi gloss finishes.