Sale!
Envirograf HW/AG Anti-Graffiti Coating

Envirograf HW/AG Clear Anti-Graffiti Coating

Reference:

Manufacturer:

Envirograf HW/AG Clear Anti-Graffiti Coating is a clear, quick-drying coating which protects against graffiti of all kinds. Used in conjunction with Envirograf fire protection coatings offers BS476 Class 0 & 1 spread of flame.

Bulk Buy

£63.92 tax excl.

-10%

£71.02 tax excl.

£76.70   tax incl.

Product Description

Envirograf HW/AG Clear Anti-Graffiti Coating is a clear, quick-drying coating which protects against graffiti of all kinds. Used in conjunction with Envirograf fire protection coatings offers BS476 Class 0 & 1 spread of flame.

Features & Benefits

  • One-pack, spirit based, external coating which gives effective protection against graffiti
  • Can be cleaned repeatedly without special chemicals
  • Excellent adhesion to concrete, brick, stone, render, timber, metal, cladding and most previously sealed surfaces (Use on masonry paint should be patch tested first for adhesion)
  • Short drying and re-coating times mean rapid protection can be achieved
  • Available in Matt or Gloss finish
  • As Envirograf HW/AG Clear Anti-Graffiti Coating is a clear coating, the surface must be decorated as required before application.

Application

Remove all traces of graffiti and re-decorate if necessary before coating with Envirograf HW/AG Clear Anti-Graffiti Coating. If applying Envirograf fire protection coatings then this should also be done before applying Envirograf HW/AG Clear Anti-Graffiti Coating (in the case of Envirograf HW01 White Intumescent Coating or Envirograf HW02E Clear Intumescent Coating a spirit based top coat should be applied before HW/AG) Stir well before use. Apply using brush, roller or spray. Envirograf HW/AG Clear Anti-Graffiti Coating is supplied ready for use and does not need thinning. Do not use solvents, thinners or white spirit.

Apply 2 coats at 8 – 10m² per litre. The second coat can be applied when the first is touch-dry.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)8 - 10m² per litre
Touch Dry1 - 3 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable