• On sale!
Envirograf HW05 Clear Top Coat
  • Envirograf HW05 Clear Top Coat

Envirograf HW05 Clear Top Coat

Product 42 - HW05

Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02E Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.

Colour
Size
Finish
£42.77
£38.49 Save 10%
VAT excluded

£46.19 Tax incl.
Quantity

Description

Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02E Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.

Preparation and Application

Ensure that the Envirograf HW02E Clear Intumescent Coating, Envirograf ES/VFR Clear Fire Protection Coating or Envirograf QVFR Clear Fire Protection Coating surface to be coated is completely clear and dry before applying Envirograf HW05 Clear Top Coat.

Stir well before application. May be applied using brush or spray. The result is dependent on the condition of the substrate and temperature of application. Touch-dry in 20 minutes. Re-coatable in 4 hours.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
Product 42 - HW05

Data sheet

Application
Brush, Spray
Coverage
12m² per litre
Touch Dry
20mins
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

PPG Steelguard 2458

PPG Steelguard 2458 is a one-component, solvent-borne acrylic finish coat for SteelGuard intumescent coatings. Top Features Good gloss and color retention Resistant to water and splash of mild chemicals

Price £422.80
In stock

Envirograf QVFR Premier Clear Top Coat

Envirograf QVFR Premier Clear Top Coat is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces: Can be applied by brush, roller or spray Available in matt, satin or gloss finishes Can be used over Envirograf QVFR Clear Fire Protection Coating Low odour Quick drying

Price £28.31 Regular price £31.46
In stock

Sherwin-Williams Firetex M71V2

Sherwin-Williams Firetex M71V2 is a sheen decorative topcoat for the Firetex range of single pack intumescent coatings and also provides protection when used in internal semi-controlled conditions where condensation may occur (Category C2 as defined in ISO 12944-2).

Price £70.69
In stock

Envirograf HW Ultimate Top Coat

Envirograf HW Ultimate Top Coat is a premium quality, satin sheen, coloured finish for the use over Envirograf HW01 White Intumescent Coating:  Suitable for interior and exterior use on wood Low odour High opacity finish Quick drying and non-yellowing

Price £102.67 Regular price £114.08
In stock

Sherwin-Williams Sher-Cryl M770

Sherwin-Williams Sher-Cryl M770 (formerly known as Envirogard M770) is a water based quick drying gloss finish or sealercoat for the entire Sherwin-Williams FX product range. 

Price £78.80
In stock

Envirograf QVFR Premier Plus Top Coat

Envirograf QVFR Premier Plus Top Coat is a coloured, water-based, hard wearing top coat:  Offers a superb finish for application over Envirograf QVFR White Fire Protection Coating Available in matt, satin or gloss finishes Designed as a high quality INTERNAL coating for general use Ready to use, and does not need thinning

Price £149.60 Regular price £166.22
In stock

Envirograf HW Excel Top Coat

Envirograf HW Excel Top Coat is a solvent based product to apply over Envirograf HW01 White Intumescent Coating:  No need for an undercoat Available in Satin or Gloss finishes Gives a high quality durable finish for internal & external use Suitable for use on all types of timber substrate

Price £115.13 Regular price £127.92
In stock

Hydron Nu-Flame FR Undercoat

Nu-Flame FR Undercoat is a gloss flame retardant undercoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame. Advantages Flame retardant basecoat Oil-based Gloss finish RAL colours

Price £20.45
In stock

Bollom Flameguard Ultra Vinyl Matt

Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel. ADVANTAGES Hard wearing vinyl matt finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces

Price £61.93
In stock

Bollom Flameguard Ultra Gloss

Bollom Flameguard Ultra Gloss is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal for steel. ADVANTAGES Hard wearing gloss finish Top coat for Bollom intumescents for wood and steel Provides Class 0 on non-combustible surfaces

Price £45.58
In stock

Thermoguard Smoke & Flame Retardant Dualcoat

Thermoguard Smoke & Flame Retardant (SFR) Dualcoat is for use over Thermoguard Timbercoat. ADVANTAGES Topcoat and maintenance paint for timber surfaces protected with Thermoguard Timbercoat Controls surface spread of flames and fire propagation Total smoke control BS EN Class B s1 d0 and BS Class 1 and Class 0 (as part of a complete...

Price £54.00
In stock