Envirograf HW Excel Clear Top Coat
Envirograf HW Excel Clear is a flame-retardant varnish topcoat that is used as part of an intumescent Envirograf system for timber:
- Matt, satin or gloss finishes available
- Internal use only
- For use over Envirograf HW02N Clear Intumescent Coating
- Solvent-based varnish
- Apply by brush or roller
Envirograf HW Excel Clear Top Coat is a solvent based product to apply over Envirograf HW02N Clear Intumescent Coating with no need for an undercoat. Available in Matt, Satin or Gloss finishes. Gives an easy to maintain clear finish to all types of timber substrate and is for internal use only.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Stir Envirograf HW Excel Clear Top Coat well before and during use. Apply using brush or roller. Envirograf HW Excel Clear Top Coat is supplied ready for use and does not need thinning.
For internal use apply 1 coat at 10 – 12m² per litre
(Ensure end grain is treated with each coat)
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 10 - 12m² per litre
- Touch Dry
- 4 - 6 Hours
Be the first to ask a question about this product!