Sale!
Envirograf HW Ultimate Clear Top Coat

Envirograf HW Ultimate Clear Top Coat

Reference:

Manufacturer:

Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.

Bulk Buy

£47.05 tax excl.

-10%

£52.28 tax excl.

£56.46   tax incl.

Product Description

Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.

Application

All surfaces should be clean, dry and free from loose particles and contamination.

Envirograf HW Ultimate Clear Top Coat can be thinned using up to 5% water. Stir well before application. The result is dependent on the condition of the surface and temperature of application. The coverage rate is 10-12m² per litre, For hardwearing areas apply 2 coats. Up to 10% water can be added for spray application.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)10 - 12m² per litre
Touch Dry2 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable