All surfaces should be clean, dry and free from contamination.
Envirograf HW Translucent Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
For internal use apply 1 coat at 10 – 12m² per litre
For external use apply 2 coats at 10 – 12m² per litre
(Ensure end grain is treated with each coat)
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Flame Retardant Floor Paint is a heavy-duty, flame retardant coating for interior concrete floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent...
Bollom Flameguard Ultra Acrylic Eggshell is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 for steel.
Hard wearing eggshell finish
Top coat for Bollom intumescents for wood and steel
Provides Class 0 on non-combustible surfaces
Envirograf HW Superb Top Coat is an innovative, water based, high sheen, coloured gloss, for use over HW01 White Intumescent Coating without the need of an undercoat and also on interior and exterior wood:
Looks, feels and applies like a traditional gloss
Quick drying - reducing application times
Low odour and contains less atmospheric...
Envirograf HW Premier Top Coat is a coloured, water-based product to apply over Envirograf HW01 White Intumescent Coating with no need for an undercoat:
Available in matt, satin or gloss finishes
For internal use only
Apply one coat at 10 - 12m² per litre
Thermoguard Flame Retardant Topcoat is an oil based, decorative flame-retardant paint used to decorate and complete Thermoguard fire protection upgrading systems.
Oil-based, decorative eggshell or gloss finish with colour options
BS476 Part 7; Class 1 surface spread to flame
BS476 Part 6; Fire propagation
Designated Class 0...
Nu-Flame FR Gloss is a gloss flame retardant topcoat paint for new and previously painted surfaces where a gloss finish is required. For use on door, skirting and other timber finishes. Tested to BS 476 part 7 and passes Class 1 surface spread of flame.
Flame retardant topcoat
Envirograf HW/CRC Top Coat is a chlorinated rubber top coat for use over Envirograf HW02E Clear or HW01 White Intumescent Coatings in areas of high humidity:
Heavy duty single pack coating for use in difficult areas
Excellent heavy duty protection
Chemical and water resistance
Ideal coating for concrete and steel used in difficult conditions such as...
Envirograf ENV/HS High-Density Clear Lacquer is for use over Envirograf HW02E Clear Intumescent Coating, ES/VFR Clear Fire Protection Coating or QVFR Clear Fire Protection Coating in areas that are subject to high wear.
Bollom Flameguard Ultra Primer/Undercoat is for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces.
Seals porous surfaces
A flame retardant top coat developed specifically for external walls and is tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Perfect for use on external warehouse and industrial outlet walls to minimise potential damage in hazardous environments.
For use on...
Envirograf HW Acrylic Top Coat is a coloured, water based topcoat:
For use over Envirograf HW01 White Intumescent Coating, ES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating
Designed as a high quality internal coating for general use
Ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc.
Nu-Flame FR Colourcoat is a flame retardant finish for walls and ceilings. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations, demonstrating this water-soluble coating is safe for internal use.
Perfect for walls and ceilings.
RAL colour shades.
Can also used as a basecoat for use prior to...
Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access.
Seals isolated asbestos fibres
Prevents asbestos release
Permanently bonds asbestos fibres
Available in 12m² or 50m² pack sizes