Nu-Flame Steel Top Coat is a hard, single coat, high build flame retardant, anti-corrosion coating for internal and external steel and cast iron. For new construction and maintenance painting.
Resistant to physical damage, corrosion, most chemicals and weathering, with an extended lifespan up to 50 internal years
Based on a high durability resin, antimony oxide flame retardant agents, high opacity and corrosion resistant pigments
500+ RAL & British Standard colours available in gloss and semi-gloss finishes
Product customisation
Don't forget to save your customization to be able to add to cart
Nu-Flame Steel Top Coat is a hard, single coat, high build flame retardant, anti-corrosion coating for internal and external steel and cast iron.
Features & Benefits
Greatly reduces application cost whilst substantially increasing the time between maintenance cycles
Resistant to physical damage, corrosion most chemicals and weathering
Extended lifespan up to 50 internal years
In severe exposure or environmental locations apply a coat of semi-gloss followed by a coat of gloss top coat
Based on a high durability resin, antimony oxide flame retardant agents, high opacity and corrosion resistant pigments
Coverage rate 7 m² per Litre
Touch dry in 4 hours, overcoat in 16 hours
Nu-Flame Steel Top Coat is compatible with all good quality metal primers. Prime bare areas with Nu-Flame High Build Metal Primer
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
HPC 104
Data sheet
Interior / Exterior Use
Interior & Exterior use
Application Method
brush, roller or airless spray, to spray use 0.013-0.017" tip
Pack Size
5L
Coverage
7 m² per Litre
Recommended Thinner/Cleaner
White spirit
Compatible Primers
Nu-Flame High Build Metal Primer, all good quality metal primers
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Nu-Flame High Build Metal Primer is a high build quick drying corrosion resistant metal primer for structural steel and cast iron.
Suitable for application in Steel Fabricators shops or on site. Will protect exposed structural steel during construction and protect internal steelwork
Compatible with Nu-Flame and most other intumescent paint...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.