Tor Acrylic Eggshell, a high quality eggshell finish for use on walls, ceilings and textured wallpapers. Provides a class 0 rated surface when applied directly over a non-combustible surface such as plaster or concrete etc.

Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.

Features & Benefits

• May be applied over sound and well adhered emulsion paints
• Provides a class 0 rated surface when applied directly over a non-combustible surface such as plaster or concrete etc
• Single pack water based pigmented acrylic
• Water-based
• Brush and roller application
• 40% volume solids
• Very low VOC
• Good coverage of up to 10 square metres per litre
• 1400+ colours in RAL, BS and NCS shades
• Limitations:
  • Do not apply and/or allow to dry at temperatures below 5℃
  • Do not apply if condensation is likely to occur
  • Drying times will be extended if temperature falls below 10℃
  • Protect material and freshly applied film from frost
  • Two coats are normally applied over sealed or previously painted surfaces, however, additional coats may be required if there is a vast colour difference between the substrate and applied coats
  • Class 0 rating is valid only when Tor Acrylic Eggshell is applied directly on to a non-combustible substrate.

IMPORTANT FIRE PRODUCTS NOTICE:  The information displayed on this website should be used as a guide ONLY and  our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with  Condition 8 of the Terms and Conditions .  We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.