- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Sherwin-Williams Firetex M72
Sherwin-Williams Firetex M72 is a solvent based intumescent mastic coating, used for the repair of small areas of mechanical damage to Firetex range of intumescent coatings.
A full range of primers have been fire tested and approved for use under FIRETEX M72. Please consult Rawlins Paints' Technical Team for detailed information.
For certain dry internal situations where the final colour/ appearance is not critical, then FIRETEX M72 may remain un-topcoated.
For all other in-service conditions then either FIRETEX M71V2, Sher-Cryl M770, Acrolon C137V2 or Acrolon C237 must be used as topcoat as appropriate to end use conditions.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Be the first to ask a question about this product!