The Ablative Liquid is available separately to enable site repairs to Firepro Ablative Coated Batt, that may have been damaged during installation.
Ablative Coated Batt is intended to act as an air seal barrier to reinstate the fire resistance and acoustic performances of concrete floors, masonry walls and dry wall systems when voids have been created for the passage of services. This includes pipes made of plain or stainless steel, cast iron, copper, polypropylene (PP), high density polythene (HDPE ), PVC and ABS along with all sheathed cables up to 80mm and supported cable bundles up to 100mm
Dries to give a sound, flexible white surface finish
Provides a stable surface for adhesive and fixing sealants
Performance
Firepro Ablative Liquid is designed to re-seal the surface of Firepro Ablative Coated Batt where damage to the ablative coating may have occurred during installation.
Firepro Ablative Coated Batt has been tested to the dedicated fire resistance standard for penetration seals EN 1366-3. Ablative Coated Batt fire resistance tests were conducted using Firepro Acoustic Intumescent Sealantand/ or Firepro Glue.
Firepro Ablative Liquid and stone wool slabs may only be used to fire protect service penetrations if supported by independent fire test evidence due to the variants in the density and thicknesses of stone wool slabs available.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi What is the fire rating of the ablative liquid. I have a wall lining in a data riser with limited access and require 1 hour fire rating[ the existing wall is plastered] thanks Please respond urgently thanks
Answer from Rawlins’ Technical Team:
Firepro Ablative Liquid is designed to re-seal the surface of Firepro Ablative Coated Batt where damage to the ablative coating may have occurred during installation.
Firepro Ablative Liquid and stone wool slabs may only be used to fire protect service penetrations if supported by independent fire test evidence due to the variants in the density and thicknesses of stone wool slabs available.
Rockwool Firepro Ablative Liquid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Rockwool FirePro Glue is a water based, fire resistant adhesive suitable for use with FirePro Beamclad and Rockwool Fire Duct Systems where glued joints or noggins are required.Can be used in conjunction with other Rockwool Stone Wool products where there is a requirement for a fire resistant adhesive Authorised for use in LUL surface and...
Rockwool Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of Rockwool Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.Up to 4 hours* fire protection Used to...
The Rockwool 50mm Ablative Coated Batt comprises a high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void...
The Rockwool 60mm Ablative Coated Batt comprises a high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void...