Jotun Steelmaster 60/120



Jotun Steelmaster 60/120 is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Bulk Buy

£63.29 tax excl.

£75.95   tax incl.

Product Description

Jotun Steelmaster 60/120 is specially designed as passive fire protection for steel constructions. Suitable for structural steel to be exposed to a wide range of corrosive environments up to high as a part of a complete system.

Approvals and certificates

  • BS 476 (30, 45, 60 minutes)
  • UK Rail track/Network rail approved for Specification RT98

Additional certificates and approvals may be available on request.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)1m² per litre (typical)
Touch Dry1 hour
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Maz on 18/02/2017
Question: What is the coverage of 1L please ?

Jotun Steelmaster 60/120 doesn't state a coverage rate as it's coverage will vary widely depending on the level of fire protection required and the steel it is being applied to.

To receive a specification for the product please forward us the following information to [email protected]

- Level of fire protection required (i.e. 30, 60, 90min, etc.)
- Each steel section dimension (i.e. 254x146x37 UB)
- Quantity and length of each section (or overall meterage for each section)
- Orientation (horizontal or vertical)
- Number of sides to be painted (all sides, 3 sides, 1 flange, etc.)
- Environment (internal, external, chemical exposure, etc.)

Alternatively you can just forward us drawings, fabrication/cutting lists and we'll extract the information from them but in that instance we'd need some guidance as to what to allow for i.e. all steels on first floor, etc.

Question about the product

* Required fields

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable