International Interchar 2060
  • International Interchar 2060

International Interchar 2060

HFA060

International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified.

Colour
Size
Finish
£326.35
VAT excluded

£391.62 Tax incl.
Quantity

Description

Intended Uses:

  • To provide upto 60 minutes fire protection on 'I' sections beams, columns and hollow sections.
  • Suitable for both off-site and on-site application due to its ease of use, fast drying and handling properties. Can be used over a wide range of approved priming systems.

Features & Benefits:

  • Independently tested and third party certified at accredited laboratories
  • Class leading thin film intumescent
  • Designed to suit both on-site and off-site applications
  • Rapid drying times for fast handling and throughput
  • Single pack, user friendly product for single leg airless spray application
  • Compatible with a wide range of primers and topcoats
  • 60 minutes fire protection provided by a single coat application

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
HFA060

Data sheet

Application
Brush, Spray
Coverage
1 m²/litre at 750 microns; 40 sq.ft/US gallon at 30 mils d.f.t (and stated volume solids)
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Matthew Youds on 2019-03-26 10:15:01
Question: 

Can this product be painted over once applied?

Answer: 

The following topcoats are approved for use with International Interchar 2060 - Intersheen 579, Interthane 870, Intercryl 525 and Interthane 990.


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Steelmaster 600WF

Jotun Steelmaster 600WF is specially designed as passive fire protection for steel constructions. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide 90 minutes fire duration as per BS476 part 20-21. Suitable for structural steel exposed to internal environments up to corrosivity category C3 (ISO...

Price £61.81
In stock

Sherwin-Williams Firetex FX5120

Sherwin-Williams Firetex FX5120 is a water based TCEP free thin film intumescent coating. Firetex FX5120 has been designed for application by airless spray, to provide fire resistance for periods of up to 120 minutes on structural steel. FX5120 can also be used to enhance the fire resistance of concrete slabs and decks up to 60 minutes. 

Price £160.06
In stock

Sherwin-Williams Firetex FX2005

Sherwin-Williams Firetex FX2005, a single pack thin film intumescent coating designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel. Tested and assessed to EN13381-8 European Technical Approval 16-0588 CE Marking Number 1121-CPR-GA5030 Can resist normal weather conditions...

Price £207.90
In stock

PPG SteelGuard 702

PPG SteelGuard 702 is a one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow-section structural steel. Provides up to 90 minutes protection from cellulosic fires and is suitable to apply on or offsite. Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053 Assessed to...

Price £464.60
In stock

International Interchar 1260

International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.  Coverage Calculator

Price £491.13
In stock

Envirograf EP/FS/TCW Water-Based Top Coating for Steel

EP/FS/TCW Water-Based Top Coating for Steel is part of the Intumescent Coating for Steel & Aluminium Protection range, helping protect steelwork with extra fire protection. Hard & glossy top coat Good weather resistance Apply with a brush, roller or spray For internal & non-exposed areas

Price £18.88
In stock

International Interchar 1120

International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. A low VOC intumescent material independently fire tested that will maintain your architectural aesthetics for fire...

Price £490.71
In stock

Bollom Brosteel Ultra 60 - NEW IMPROVED!

Bollom Brosteel Ultra 60, a new improved revolutionary thin-film waterborne white intumescent paint for standard, interior structural steel members, providing 30 minutes fire protection in only one coat and 60 minutes in two coats - see below for details. New, improved formula For internal use only Water-based - quick drying thin-film...

Price £54.58
In stock

Sherwin-Williams Firetex FX1003

Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel.

Price £207.90
In stock

International Interchar 2060c

Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...

Price £501.99
In stock

PPG SteelGuard 851

A one component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Short handling times are accomplished due to the fast-drying nature of this coating, and provides up to 120 minutes of protection from cellulosic fires. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry...

Price £420.20
In stock

Sherwin-Williams FIRETEX M95/02

Sherwin-Williams FIRETEX M95/02 is an epoxy intumescent suitable for cellulosic fire protection which can be applied directly onto blast cleaned steel. It is an exterior durable intumescent, suitable for application in-shop and on site, provided the conditions specified in the product data sheet are adhered to.

Price £206.89
In stock

Jotun Steelmaster 1200WF

Jotun Steelmaster 1200WF is a one component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates.

Price £160.72
In stock

PPG SteelGuard 802

A one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow section structural steel. Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053 Assessed to ETAG 018-2 for all durability classifications Coverage Calculator

Price £416.20
In stock

Envirograf Intershield Flexible Top Coat

Intershield Flexible Top Coat is part of the Intumescent Coating for Steel & Aluminium Protection range, helping protect steelwork with extra fire protection. Chlorinated rubber flame retardent Complies with BS476 Parts 6 & 7, Class 0 & Class 1 (1987) Spread of flame Apply by brush, roller or sprayer No thinning required

Price £38.34
In stock