This pack provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteel WB+ Finish) to protect suitably primed, standard structural steel beams and columns in internal environments to 60 minute fire resistance.
Sherwin-Williams Firetex J210 Scrim Cloth
Sherwin-Williams Firetex J120 is a high temperature fire resistant fabric scrim cloth, designed to reinforce the insulation ‘char’ developed when Firetex M90 reacts in a fire.
Sherwin-Williams Firetex J120 is suitable for use in hydrocarbon pool fires for the protection of structural steelwork, process vessel and support structures, and on deck and bulkhead panels. Installation to be in accordance with the Firetex M90 application manual and per certification requirements.
- Approved by Lloyds Register of Shipping Approved by Det Norske Veritas
- Approved by Bureau Veritas
- Approved by American Bureau of Shipping Approved by Bundesanstalt fur Materialforschung und-prufung
- Approved by the Head of the Netherlands Shipping Inspection
- Approved by Underwriters Laboratory for UL1709 external use
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
A one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow section structural steel. Top Features Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053 Assessed to ETAG 018-2 for all durability classifications
A one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow-section structural steel. Provides up to 90 minutes protection from cellulosic fires and is suitable to apply on or offsite. Top Features Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053 Assessed to ETAG...
Sherwin-Williams Firetex M71V2 is a sheen decorative topcoat for the Firetex range of single pack intumescent coatings and also provides protection when used in internal semi-controlled conditions where condensation may occur (Category C2 as defined in ISO 12944-2).
Nullifire TS815 Solvent-Based Acrylic Top Seal is a single pack, high build modified acrylic topseal conforming to 2010 VOC limits. This product is designed for use with the Nullifire System S range of intumescent basecoats.
Thermoguard High Build Metal Primer is the compatible, corrosion-resistant primer recommended for use on suitably prepared steel prior to the application of Thermoguard Thermocoat W. ADVANTAGES High build Quick dry Corrosion resistant Water-based/Solvent-based Protects during construction
Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
Nullifire S606 Solvent-Based Intumescent Coating is a single pack solvent-based intumescent coating for fire protection of both internal and external structural steelwork. S606 is very pale pink in colour. S606 provides effective structural fire protection for steelwork, from 60 minutes up to a 120 minute fire rating. Suitable for universal and hollow...
This pack provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteel WB+ Finish) to protect suitably primed, standard structural steel beams and columns in internal environments to 30 minute fire resistance.
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Sherwin-Williams Firetex FX5120 is a water based TCEP free thin film intumescent coating. Firetex FX5120 has been designed for application by airless spray, to provide fire resistance for periods of up to 120 minutes on structural steel. FX5120 can also be used to enhance the fire resistance of concrete slabs and decks up to 60 minutes.
A one-component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Provides up to 120 minutes protection from cellulosic fires. Top Features Tested and assessed to EN 13381-8, BS 476-20/21 and AS 1530.4 CE marked product, ETA 15/0439 Assessed to ETAG 018-2 for all durability classifications
International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires.