Thermoguard High Build Metal Primer is the compatible, corrosion-resistant primer recommended for use on suitably prepared steel prior to the application of Thermoguard Thermocoat W. ADVANTAGES High build Quick dry Corrosion resistant Water-based/Solvent-based Protects during construction
Sika Unitherm Platinum 120
We no longer stock this product, but can recommend International Interchar 212 as a great alternative.
Sika Unitherm Platinum 120 is a solvent free, ultra high build, two pack, modified epoxy based, intumescent fire protection coating for internally or externally exposed structural steel. Ideal for in-shop application.
Sika Unitherm Platinum 120 is a 100% solids intumescent fire protection coating for internally or externally exposed structural steel, where it provides high durability and combined corrosion protection (to ISO 12944, Class 5-I & 5-M) and fire protection (up to R120).
It is easily applied with standard airless spray equipment, requires no reinforcement, cure rapidly to a very tough and damage resistant finish, ready for handling and transport next day.
Features & Benefits
- Solvent-free, 100% solids
- Low odour and zero flash risk
- No primer required
- Easy application with standard 66:1 airless spray
- Can be applied in 1 coat up to 4mm DFT
- Expected life cycle 25 years
- Thick layers without any additional reinforcement
- Rapid cure - Next day handling & transport
- Very tough - minimal handling damage and touch-up costs
- Suitable for small sections and complex steel sections
- Excellent corrosion protection properties according to ISO 12944, Class 5-I and 5-M (coating system)
- Highly resistant to mechanical impact and damage in service
- Durable for a long service life
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.
Sherwin-Williams Firetex J120 is a high temperature fire resistant fabric scrim cloth, designed to reinforce the insulation ‘char’ developed when Firetex M90 reacts in a fire.
International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. A low VOC intumescent material independently fire tested that will maintain your architectural aesthetics for fire resistance periods...
International Interchar 1290 is a thin film waterborne intumescent coating optimised for hollow sections up to 180 minutes fire resistance whilst still maintaining aesthetics. Interchar 1290 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site application to structural steel requiring protection...
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without first seeking...
This pack provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteel WB+ Finish) to protect suitably primed, standard structural steel beams and columns in internal environments to 60 minute fire resistance.
Nullifire TS816 Water-Based Acrylic Top Seal is a waterborne, acrylic eggshell decorative topseal. It is primarily for use with Nullifire Intumescent Basecoats on internal steelwork.
International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified.
Jotun Steelmaster 600WF is specially designed as passive fire protection for steel constructions. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide 90 minutes fire duration as per BS476 part 20-21. Suitable for structural steel exposed to internal environments up to corrosivity category C3 (ISO 12944 -2).
Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide ﬁre resistance for up to 120 minutes on structural steel.
Jotun Steelmaster 1200WF is a one component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates.
Sherwin-Williams Sher-Cryl M770 (formerly known as Envirogard M770) is a water based quick drying gloss finish or sealercoat for the entire Sherwin-Williams FX product range.
Nullifire S708 Durable Water-Based Intumescent Basecoat is a white thin film intumescent coating for the fire protection of internal and semi-exposed structural steelwork but can be fully exposed during construction. It can provide up to 60 minutes fire resistance.
Jotun Steelmaster 60/120 is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.