Jotun Steelmaster 600WF is specially designed as passive fire protection for steel constructions. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide 90 minutes fire duration as per BS476 part 20-21. Suitable for structural steel exposed to internal environments up to corrosivity category C3 (ISO 12944 -2).
Jotun Steelmaster 600WF is a one component waterborne acrylic thin film intumescent coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as mid coat or finish coat in atmospheric environments. Suitable on approved primers on carbon steel substrates.
Typical Use
Jotun Steelmaster 600WF is specially designed as passive fire protection for steel constructions. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide 90 minutes fire duration as per BS476 part 20-21. Suitable for structural steel exposed to internal environments up to corrosivity category C3 (ISO 12944 -2).
Approvals and Certificates
This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.
BS 476 part 20/21
Additional certificates and approvals may be available on request.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi, I need 60min fire protection for a total of 14.8sq m (on 3 separate beams). How many liters do I need? Additionally, can this be applied directly on red oxide or do I need to apply a primer first? Thanks
Answer from Rawlins’ Technical Team:
We have contacted you directly for more information.
sean hubball on 2021-10-29 15:18:00
Question:
Hi im just wondering, Can this paint be used as a primer and then have a top coat over it?
Answer from Rawlins’ Technical Team:
This product must be used over a compatible primer and with a compatible topcoat, we can assist with specifications for intumescent paints for steel.
- Level of fire protection required (i.e. 30, 60, 90min, etc.) - Each steel section dimension (i.e. 254x146x37 UB) - Quantity and length of each section (or overall meterage for each section) - Orientation (horizontal or vertical) - Number of sides to be painted (all sides, 3 sides, 1 flange, etc.) - Structural Steel Design Code (i.e. EuroCode, BS5950, BS476; Part 21, etc.) - Building type (i.e. office, domestic, storage, etc.) - Environment (internal, external, car park, chemical exposure, etc.) - Application on site or in shop Alternatively you can just forward us drawings, fabrication/cutting lists and we'll extract the information from them but in that instance we'd need some guidance as to what to allow for i.e. all steels on first floor, etc.
Are you able to tell me how much Jotun Steel 600wf i Require if I send you a detailed plan of exactly what steels need to be protected, also a top coat in a eggshell finish. Regards Rob
Answer from Rawlins’ Technical Team:
Yes we can provide a specification for you.
We have contacted you directly for more information.
Kevin Rhodes on 2019-12-23 16:11:38
Question:
Can this paint be used on a typical mezzanine floor
Answer from Rawlins’ Technical Team:
Assuming you are enquiring about protecting the supporting steels, please provide us with as much of the following information as possible;
Level of fire protection required (i.e. 30, 60, 90min, etc.)
Each steel section dimension (i.e. 254x146x37 UB)
Quantity and length of each section (or overall meterage for each section)
Orientation (horizontal or vertical)
Number of sides to be painted (all sides, 3 sides, 1 flange, etc.)
Environment (internal, external, car park, chemical exposure, etc.)
Application on site or in shop
Alternatively you can just forward us drawings, fabrication/cutting lists and we'll extract the information from them but in that instance we'd need some guidance as to what to allow for i.e. all steels on first floor, etc.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...