Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Thermoguard High Build Metal Primer
Thermoguard High Build Metal Primer is the compatible, corrosion-resistant primer recommended for use on suitably prepared steel prior to the application of Thermoguard Thermocoat W.
- High build
- Quick dry
- Corrosion resistant
- Protects during construction
Thermoguard High Build Metal Primer
Thermoguard High Build Metal Primer is a solvent based, quick drying, corrosion resistant metal primer for structural steel in shop or on site. Compatible with Thermoguard Thermocoat W and most other intumescent paint systems, epoxy and conventional paints.
- Ideally with Thermoguard Thermocoat W
- Steel fabricator’s shops
- Work sites
Thermoguard High Build Metal Primer will protect exposed structural steel during construction as well as protecting internal steelwork thereafter.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 6m² per litre
- Touch Dry
- 30 mins
Be the first to ask a question about this product!
EP/FS/P Water-Based Primer for Steel is part of the Intumescent Coating for Steel & Aluminium Protection range (Product 83), helping protect steelwork with extra fire protection. For use on internal and external steelwork under Envirograf Intumescent steel paint Apply to bare, previously painted or galvanised steel Can be applied by...
Nu-Flame HB Metal Primer is ideal for priming cast iron and structural steel in preparation to apply the Nu-Flame Fire Retardant System for metals. Advantages Quick dry. Ideal for cast iron and structural steel. 8m²/Litre coverage. 3 colours available. 12-month shelf life.
Nullifire PM021 General Purpose Epoxy Primer is a two-components epoxy polyamide primer with excellent resistance to salts, water and alkalies, and with very good resistance to mild acids and solvents.
Bollom Flameguard Ultra Primer/Undercoat is for application prior to the use of Bollom Flameguard Ultra Topcoats on bare and previously painted non-combustible surfaces. ADVANTAGES Excellent adhesion Seals porous surfaces
This is a primer from Jotun that can be applied to steel, aluminium or wood, and features very good adhesion properties on all these substrates. Jotun Pilot QD Primer is an anti-corrosive one component oxidatively drying alkyd coating that is a fast drying, high build, zinc phosphate pigmented product. Coverage Calculator
Sherwin-Williams FIRETEX C69 is a two pack epoxy, fast-track blast primer for intumescent coatings. It is a fast-track temporary protective coating for surfaces prepared by abrasive blast cleaning, designed for use under FIRETEX intumescent coatings. Coverage Calculator
Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures.
Jotun Penguard Express ZP is a two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric...
Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the...
Envirograf HW04 Undercoat is a white water based undercoat for use over Envirograf HW01 White Intumescent Coating before applying any proprietary top coat or Envirograf HW Acrylic Top Coat.
Thermoguard Flame Retardant WB Primer, a water-based primer for application to structural steel and cast iron prior to overcoating with Thermoguard Thermocoat W and Thermoguard Flame Retardant WB Topcoat. Quick drying primer for Thermoguard anti-fire system - refer below for system specification Water-based Assists in the control of...
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Mordant Solution is part of the Intumescent Coating for Steel & Aluminium Protection range (Product 83), helping protect steelwork with extra fire protection. Prepares galvanised steel prior to coating Treats approx. 15 square metres per litre Available in 1L to 5L quantities
Envirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid: Used to prime/seal surfaces which may be absorbent, dusty or friable prior to painting/bonding Ideal for plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster) And sealing wood when using Product 38...
Thermoguard Flame Retardant WB Topcoat, a a quick drying, dual-purpose water-based flame-retardant paint for use over Thermoguard Thermocoat W for 30 or 60 mins Class O fire rating on on-combustible or intumescent protected surfaces. Protects intumescent paint and helps control the spread of flames For 30 or 60 mins refer to Thermocoat...