Tor Torrex Grip Primer, a fire retardant primer for use as the first coat of Torrex Fire Upgrading Systems, for use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
Only for use on well adhered painted surfaces
For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire
Will only achieved fire upgrading properties if applied as part of the Torrex AG or Torrex Eggshell Systems.
Torrex Fire Upgrading Systems can only be applied over previously painted surfaces which show good adhesion, both between coats and to the original surface.
Adhesion checks must be carried out before specification of the system
Do not apply and/or allow to dry at temperatures below 5°C
Do not apply if condensation is likely to occur
Only applied at 8 sq.m / litre when used with Torrex AG-X topcoat – refer to specification.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5558-888061
Data sheet
Manufacturer
Tor
Water / Solvent Based
Water
Application Method
Roller
Sheen
Matt
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Two-Pack
Pack Size
5L
Touch Dry (at 20°C)
4 hours
Dry to Recoat (at 20°C)
Min: 16 hours; Max: 7 days
Coverage
8 or 10 sq.m / litre depending upon the top coat
Recommended Thinner/Cleaner
Water
Solids by Volume
45%
Shelf Life (from date of manufacture)
2 years
Recommended Dry Film Thickness
45 microns (at 10 sq. m / litre), 56 microns (at 8 sq. m / litre)
Recommended Wet Film Thickness
100 microns (at 10 sq. m / litre), 125 microns (at 8 sq. m / litre)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Torrex Grip Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor Torrex Ultimate AG Finish, a flame retardant anti-graffiti finish for use as the final coat of the Torrex Ultimate AG System. Provides an outstanding non-sacrificial anti graffiti finish that is extremely durable and easily cleaned.To be applied over Torrex Ultimate IntermediateEnsure the Torrex Ultimate Intermediate is dry before...
Tor Torrex Fire Upgrading Eggshell Finish, a water based durable decorative fire retardant coating for use as the finish coats of the Torrex Fire Upgrading Eggshell System.Must only be applied to surfaces which have been primed with Torrex Fire Upgrading Primer EM358 or Torrex Grip Primer EP120 4,400+ colour options available in RAL, RAL...
A decorative water based fire retardant coating in 1,500+ colours for use as the finish coats of the Torrex Fire Upgrading AG-X System. Provides an outstanding non-sacrificial anti-graffiti finish that is extremely durable and easily cleaned.Must only be applied to surfaces which have been primed with Torrex Grip Primer EP120 Limitations...
Tor Torrex FR Eggshell, a durable water based decorative flame retardant finish. For use over low risk existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.Two coats of Torrex Flame Retardant Eggshell will convert 12 coats of conventional water based coatings to Class 0 when tested...