Fire retardant primer for the Torrex Fire Upgrading Systems. Used over multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
A single pack pigmented urethane acrylic coating containing flame retardants
Water-based
Brush or roller application
45% volume solids
Very low VOC
Quick drying - touch dry in just 2 hours, hard dry in 4-6 hours (at 20°C)
Limitations:
Torrex Fire Upgrading Primer must be applied at the specified spreading rate
Do not apply and/or allow to dry at temperatures below 5℃
Do not apply if condensation is likely to occur
Drying times will be extended if temperature falls below 10℃
Torrex Fire Upgrading Primer should not be applied directly over hard and/or glossy anti graffiti coatings. Under these circumstances a coat of Aqualife WSE Primer EP131 must first be applied
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Torrex Fire Upgrading Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A water based decorative fire retardant coating with 1,500+ colour options for use as the finish coats of the Torrex Fire Upgrading Vinyl Matt System.Use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire Part of the Torrex Fire Upgrading Vinyl Matt system Limitations apply...
A water based decorative fire retardant coating with 1,500+ colours for use as the finish coats of the Torrex Fire Upgrading Vinyl Silk System.Use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire Part of the Torrex Fire Upgrading Vinyl Silk system Limitations apply...
A decorative fire retardant coating with 3,800+ colour options for use as the finish coats of the Torrex Fire Upgrading Vinyl Gloss System.Use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire Part of the Torrex Fire Upgrading Gloss system A single pack pigmented modified...