Hensel Holzgrund AQ Primer is a single component water-based, transparent adhesion promoting primer for wood. It is suitable for use on highly absorbent wooden surfaces. Part of the Hensel Hensotherm Fire Protection Range.
For use on solid wood and wooden substrates
Ideal for use as a saturation coat on highly absorbent wooden surfaces
Improves adhesion of Hensel Hensotherm fire retardant coatings on smooth surfaces
Fast Drying - Hensotherm Coatings can be applied after approximately 4 Hours @20°C
Hensel Holzgrund AQ Primer is a single component water-based, transparent adhesion promoting primer for wood. It is suitable for use on highly absorbent wooden surfaces and improves adhesion on smooth surfaces for Hensotherm fire protection coatings.
The above products may be applied over Hensel Holzgrund AQ Primer after approximately 4 hours @20°C.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hensel Holzgrund AQ Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Hensel Hensotherm 1 KS Clear Interior is a single component, transparent intumescent coating for the fire protection of interior wooden...
Hensel Hensotherm 2 KS White Interior is a single component, white intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 8mm and a density of under 338 kg/m³.Fire behaviour is classified B-s1, d0 according to DIN EN 13501...
Hensel Hensotherm 2 KS Black Anthracite Interior is a single component, black anthracite intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 12mm. It has been specially developed for the fire protection of wooden structures used...
Hensel Hensotherm 2 KS Exterior is a single component, intumescent coating for the fire protection of exterior wooden structures. For use on wooden coreboards and solid wood with a thickness of under 12mm and a bulk density at least 630 kg/m³. Fire behaviour is classified C-s2, d0 according to DIN EN 13501-1 (SBI-test) if applied on all...