A varnishing process with 4,000+ colour options comprising a basecoat (Irufire B-s1, d0 PUR Primer) and a topcoat (Irufire B-s1, d0 PUR Topcoat). Both products are bicomponent based on acrylic resin.
Formulated for finishing wood surfaces classified as B-s1, d0 which have to comply with the UNE-EN-13.823:2002 standard for reaction to fire and classification B-s1, d0 according to UNE-EN-13.501-1:A1:2010 (Euroclases)
Very good application with all types of projection equipment (Aerographic, airmix and airless)
Good wetting properties, transparency, thixotropy, smoothness, appearance, surface hardness, homogeneity of nuanced and appearance
Good resistance to abrasion, rubbing and scratching
Good covering power
Unalterable to the light
Application
Support: All sorts of veneers and solid wood, commonly used for ceilings and wall cladding. Do not apply on wood containing more than 12% of moisture
Preparation of the support: Remove sanding residue
Application: Homogenize varnishes and mixtures before use. If necessary the viscosity can be adjusted with the addition of solvents as 125 DPN, S-157, etc
Process: To reach UNE-EN 13.501:1: Apply 1x80-100 gr/m2 of Irufire B-s1, d0 PUR Primer. Allow to cure overnight and then sand with sandpaper grain 280-320. Apply 1x80-100 gr/m2 of Irufire B-s1, d0 PUR Topcoat
Gloss degrees: Irufire B-s1, d0 PUR Topcoat is available in 30% gloss (satin finish). Apply 1 coat IC120, followed by a second coat for matt, or a second coat of IC123 for satin. Each coat 80-100 gr/m2 on Euroclass B MDF
Each system is self-contained and not to be combined with each other, or any other coating materials
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Intercoat Irufire B-s1 d0 PUR Primer IC120 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Intercoat Irufire Catalyst IC212 is a catalyst for use with various industrial Intercoat wood products. For professional use only - not to be used as a standalone item. Product is the catalyst for the Intercoat Irufire range.More Information Delivery Info
Intercoat Irufire B-s1 d0 PUR IC120 is a varnishing process comprising a basecoat (Irufire B-s1, d0 PUR Primer) and a topcoat (Irufire B-s1, d0 PUR Topcoat), bicomponent based on acrylic resin.Formulated for finishing wood surfaces classified as B-s1, d0 which have to comply with the UNE-EN-13.823:2002 standard for reaction to fire and...