Thermoguard Thermoproof Clear Sealer
  • Thermoguard Thermoproof Clear Sealer

Thermoguard Thermoproof Interior Sealer

OC+TPSM20M

Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours.

Colour
  • Current colour: Clear
Choose a colour
Close colour picker
  • Clear
  • White Low
  • White Medium
  • Light Oak
  • Teak
  • Pine
  • Ebony
  • Dark Oak
  • Walnut
  • Rosewood
  • Mahogany
  • Grey
Size
Finish
£54.00
VAT excluded

£64.80 Tax incl.
Quantity

Description

Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours.

Thermoguard Thermoproof Interior Sealer doubles up as Thermoguard Fire Varnish Overcoat (Interior). The product is labelled on the containers as 'Fire Varnish Overcoat & Thermoproof Sealer' and is available in 20m² and 80m² pack sizes.

Thermoguard Thermoproof Interior Fluid is a fire protection fluid for porous internal wood. In a fire, Thermoproof Fluid reacts with the woods cells to create a flame & heat resistant barrier.

See Thermoguard Thermoproof Interior Fluid for full system details.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
OC+TPSM20M

Data sheet

Application
Brush, Roller, Spray
Touch Dry
8 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Thermoguard Fire Varnish Basecoat

Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coat externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish 30 & 60 Minute System for 30 & 60 minutes Fire Resistance.

Price £103.00
In stock

Hydron Nu-Flame FR Colourcoat

Nu-Flame FR Colourcoat is a flame retardant finish for walls and ceilings. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations, demonstrating this water-soluble coating is safe for internal use. Advantages Perfect for walls and ceilings. RAL colour shades. Can also used as a basecoat for use prior to...

Price £55.50
In stock

Envirograf HW02E Clear Intumescent Coating

Envirograf HW02E Clear Intumescent Coating upgrades the fire resistance of new and certain already coated timber and wood related surfaces. ADVANTAGES For internal/external use BS Class 0 & Class 1 and up to 60 mins fire resistance on suitable surfaces and substrates To be used as part of a full Envirograf intumescent system...

Price £32.70 Regular price £36.33
In stock

Thermoguard Fire Varnish Overcoat (Interior)

Thermoguard Fire Varnish Overcoat (Interior) is a water based, clear UV and wear resistant varnish: The final coat of a 2 coat Thermoguard system For the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish 30 & 60 Minute System for 30 or 60 minutes Fire Resistance...

Price £54.00
In stock

Envirograf EP/CP Primer

Envirograf EP/CP Primer is a water-based, clear adhesion primer to apply over existing painted surfaces before applying Envirograf EP/CP Fire Protection Coating particularly where there is distemper, dirt or dust.

Price £26.24 Regular price £29.16
In stock

Thermoguard Wallcoat BS Class 1/0 & EN Class B System

Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...

Price £96.00
In stock

Hydron Nu-Flame Clear Overcoat

Nu-Flame Clear Overcoat is a clear varnish finish coating with flame retardant qualities for application onto timber surfaces. Tested to BS476 Part 7 Class 1 surface spread of flame and BS476 Part 6 Fire propagation. Advantages Protects against humidity, heat and wear and tear Satin and Gloss finishes available 12m²/Litre coverage

Price £95.00
In stock

Hydron Nu-Flame Clear Impregnation

Nu-Flame Clear Impregnation is a fire retardant ready-to-use system that is absorbed into the surface of timber. Ideal for timber substrates that require Class '0' Spread of Flame or Euro class B. Advantages Internal and external use Non-flammable Non-toxic Solvent-free Not harmful to the environment Will not wash out 12-month shelf life

Price £111.00
In stock

Thermoguard Timbercoat BS Class 1/0 & EN Class B System

Thermoguard Timbercoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...

Price £157.00
In stock

Envirograf ES/VFR White Fire Protection Coating

Envirograf ES/VFR White Fire Protection Coating is a white coloured, water based fire retardant coating for wood, and certain wood-related products:  Suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0 Hard wearing for internal and external use Must always be finished with a suitable...

Price £25.71 Regular price £28.57
In stock

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is an anti-graffiti, decorative, flame retardant coating for walls. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide excellent resistance to oils, inks and spray paints.

Price £125.00
In stock

Hydron Nu-Flame SP Tack Primer

Nu-Flame SP Tack Primer is a smooth primer for glazed and previously painted surfaces used as part of the Nu-Flame Fire Upgrade System. Advantages White primer. Excellent adhesion. Water soluble. 14m²/Litre coverage.

Price £165.50
In stock

Envirograf ES/VFR Clear Fire Protection Coating

Envirograf ES/VFR is a Clear Fire Protection Coating for wood and timber. ADVANTAGES British Standard Class 0 & 1 and EU standard B/s1/d0 Water-based for internal/external use Can be used as part of an economically priced Envirograf system Easy and safe to apply Delivers long-term protection and fire resistance Also available in a white finish

Price £25.71 Regular price £28.57
In stock

Envirograf ES/VFR Primer

Envirograf ES/VFR Primer is a water-based clear primer to apply over existing paint or varnish surfaces before applying subsequent compatible fire protection systems to improve compatibility and adhesion with various substrates.

Price £26.85 Regular price £29.83
In stock

Zeroflame Fire Retardant Paint

Zeroflame Fire Retardant Paint is a matt white, single-pack waterborne coating for wood, and other wood derivatives that achieves Class 1 and Class 0. Achieves the equivalent to Class 0 and Class 1 to EU Standard EN13501-1:2007 Can be over-coated with waterbased latex paints Coverage rate of 3.7m² per litre Certificate included in each...

Price £89.99 Regular price £99.99
In stock