Alternatively you can email our sales & support team on [email protected]
Envirograf ES/VFR Primer
Product 92 - ES/VFR/P
Envirograf ES/VFR Primer is a water-based clear primer to apply over existing paint or varnish surfaces before applying subsequent compatible fire protection systems to improve compatibility and adhesion with various substrates.
Envirograf ES/VFR Primer is a water-based clear primer to apply over existing paint or varnish surfaces before applying subsequent compatible fire protection systems to improve compatibility and adhesion with various substrates.
Preparation
The substrate surface must be clean of all dust and dry. There should be no trace of oil, grease or similar substance. The surface should be sanded smooth, if timber is pre-varnished, ensure the surface is clean and sanded appropriately.
Application
It is important to ensure the moisture content of the wood substrate is below 17% before application. We recommend that Envirograf ES/VFR Primer is always applied before the ES/VFR system is used, even on bare timber.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Envirograf HW02E Clear Intumescent Coating upgrades the fire resistance of new and certain already coated timber and wood related surfaces.
Advantages
For internal/external use
BS Class 0 & Class 1 and up to 60 mins fire resistance on suitable surfaces and substrates
To be used as part of a full Envirograf intumescent system...
Use Envirograf HW02N Clear Intumescent Coating for fireproofing all types of timber and timber related products, upgrading new and already coated timber and wood related surfaces.
Water-based fireproof coating
For internal and external use
Must be coated over with a top protective coating
For fire doors, see the Envirograf Door Upgrade...
Thermoguard Fire Retardant Varnish Overcoat (Exterior) is for use in combination with and over Thermoguard Fire Varnish Basecoat in external applications.
ADVANTAGES
For timber/timber derived substrates
Clear, UV and wear-resistant finish
Certificate of Supply available
Certificated when used over the basecoat:
BS EN Class B s2 d0...
Envirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid:
Used to prime/seal surfaces which may be absorbent, dusty or friable prior to painting/bonding
Ideal for plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster)
And sealing wood when using Product 38...
Envirograf EP/CP is a white fire protection coating for plasterboard and lath-&-plaster ceilings of various thicknesses:
BS Class 0 & 1, EU standard B/s1/d0 & up to 60 minutes' protection
Develops a microporous intumescent layer with a smooth decorative finish
When attacked by fire, the intumescent material protects the...
Zeroflame Fire Retardant Paint is a matt white, single-pack waterborne coating for wood, and other wood derivatives that achieves Class 1 and Class 0.
Achieves the equivalent to Class 0 and Class 1 to EU Standard EN13501-1:2007
Can be over-coated with waterbased latex paints
Certificate included in each container
Internal use
Simple to...
Thermoguard Thermoproof Exterior Fluid is a penetrating fire proof fluid for bare wood such as sleepers, fencing, cladding and decking. The weather resistant, water-based, non flammable formula enables safe application by untrained and inexperienced users.
Coverage Calculator
Thermoguard Sprayshop Lacquer Topcoat, a hard, wear-resistant Fire Protection AC lacquer for application by professional lacquer sprayers in spraybooths. Provides intumescent fire protection (Class B s2 dO + Class O) to timber surfaces.
Available in woodshades and 350+ colours from RAL and BS
Quality assurance - Manufactured under ISO 9000...
Thermoguard Timbercoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...
Envirograf HW01 is a white, intumescent coating for wood.
Advantages:
BS Class 0 & Class 1 protection
30 & 60 mins’ fire resistance
White finish for upgrading new or previously coated wood & timber
Water-based for internal/external use
Should be used as part of a complete Envirograf system
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coats externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish Overcoat (Exterior) to complete the system.
Complete systems including...
Nu-Flame FR Scrubbable Colourcoat is a matt paint finish with flame retardant properties. Ideal for internal use and is easy to clean. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Meets Class 1 of ISO 11998 for scrub resistance.
Advantages
Flame retardant.
Matt finish.
Easy to...
Nu-Flame Clear Overcoat is a clear varnish finish coating with flame retardant qualities for application onto timber surfaces. Tested to BS476 Part 7 Class 1 surface spread of flame and BS476 Part 6 Fire propagation.
Advantages
Protects against humidity, heat and wear and tear
Satin and Gloss finishes available
12m²/Litre coverage
Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is an anti-graffiti, decorative, flame retardant coating for walls. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide excellent resistance to oils, inks and...
Zeroflame Fire Retardant Treatment is for use on wood and timber:
Soaks virtually ‘invisibly’ into woods and timber
Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers
Can be overcoated for decorative purposes
For internal and external use
Certificate application included
Remains...
Envirograf ES/VFR White Fire Protection Coating is a white coloured, water based fire retardant coating for wood, and certain wood-related products:
Suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0
Hard wearing for internal and external use
Must always be finished...
