Envirograf ES/VFR White Fire Protection Coating is a water based fire retardant coating for wood and certain wood-related products to be used as part of a complete system including selected primers and topcoats. Envirograf ES/VFR White Fire Protection Coating (also available in clear) is suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0 (see product data sheets and test data for full details). Envirograf ES/VFR White Fire Protection Coating is a hard wearing product that can be used internally and externally but must always be finished with a suitable topcoat.
System Features & Benefits
Achieve BS Class 1 & 0
Achieve SBI B/s1/d0
Low cost per square metre
Easy and safe to apply
Long term protection
Preparation & Application
See product data sheets in the 'Download' section below.
First coat coverage could vary according to the density or type of the timber.
For suitable applications, contact the Technical Department.
Trials in small areas must always be carried out prior to full application, as colour performance varies according to substrate structure.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Timbercoat is a durable fire protection paint for interior and exterior timber surfaces:
Meets new Fire Regulations standard:
BS EN Class B s1 d0, BS Class 1
Class O Surface Spread of Flame
Can also achieve 30 & 60 minutes Fire Resistance in certain instances
Expands to create a barrier, insulating wood from heat and oxygen...
From the Flamebar product range, Bollom Flamebar N5 is a specially formulated, effective economical water based flame retardant solution designed to improve safety.
Straw wall boards
Nu-Flame SP Multi Surface Primer is a white water-soluble primer that forms part of the Nu-Flame Fire Upgrade System.
Suitable for glass, tile, melamine and powder coating.
Envirograf QVFR White Fire Protection Coating is for wood and certain wood related products. It is suitable for upgrading new and already coated timber and wood related surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0. It leaves a matt white finish, in instances where the coating may be subject to damage or high humidity a suitable...
Envirograf ES/VFR Primer is a water-based clear primer to apply over existing paint or varnish surfaces before applying subsequent compatible fire protection systems to improve compatibility and adhesion with various substrates.
Thermoguard Fire Varnish BS Class 1/0 & EN Class B System is a clear fire retardant varnish for interior and exterior timber surfaces.
Clear or stained finish
UV and wear protection (Matt & Satin)
Enhances natural beauty
Zeroflame Fire Retardant Treatment is for use on wood and timber:
Soaks virtually ‘invisibly’ into woods and timber
Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers
Can be overcoated for decorative purposes
For internal and external use
Certificate application included
Bollom Intulac Ultra Topcoat delivers excellent clear fire protection to wood and timber.
High performing satin or matt finish
To be applied over Bollom Intulac Ultra Basecoat to complete a Class 0 fire-rated system
Decorative varnish system for interior use
Certificates of conformance & installation available
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with anti-graffiti properties. Water-soluble, easy to clean and available in BS 4800 shades.
Water-soluble urethane coating.
Safe for internal applications.
Easy to clean.
BS 4800 shades.
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations.
Contains an active Anti-Microbial
For walls and...
Envirograf HW02E Clear Intumescent Coating upgrades the fire resistance of new and certain already coated timber and wood related surfaces.
For internal/external use
BS Class 0 & Class 1 and up to 60 mins fire resistance on suitable surfaces and substrates
To be used as part of a full Envirograf intumescent system...
Thermoguard Flame Retardant Anti-Graffiti Clear Glaze is an exceptionally smooth, hard and impermeable clear two-pack flame retardant coating for internal and external use. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide excellent...
Nu-Flame FR Colourcoat is a flame retardant finish for walls and ceilings. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations, demonstrating this water-soluble coating is safe for internal use.
Perfect for walls and ceilings.
RAL colour shades.
Can also used as a basecoat for use prior to...
Envirograf HWAP/WB Primer is a clear water based primer:
For use under Envirograf HW01 and HW02E Intumescent coatings
Can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate
Application by brush or roller
Thermoguard Wallcoat is a white intumescent basecoat (part of a complete system) to upgrade potentially dangerous ‘multi-layer’ - previously painted - walls & ceilings in communal areas:
Controls surface spread of flame and fire propagation to Class 0 & EN Class B
Achieves EU and new British safety standards on walls and ceilings...