Envirograf HWAP/WB Primer is a clear water based primer for use under Envirograf HW01 and HW02E Intumescent coatings. It can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate.
Application & Coverage
Envirograf HWAP/WB Primer can be applied by brush or roller. Coverage is 10-12m² per litre.
Note: It is important to ensure the moisture content of the wood substrate is below 17% before application.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Thermoguard Timbercoat is a durable fire protection paint for interior and exterior timber surfaces:
Meets new Fire Regulations standard:
BS EN Class B s1 d0, BS Class 1
Class O Surface Spread of Flame
Can also achieve 30 & 60 minutes Fire Resistance in certain instances
Expands to create a barrier, insulating wood from heat and oxygen...
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with anti-graffiti properties. Water-soluble, easy to clean and available in BS 4800 shades.
Water-soluble urethane coating.
Safe for internal applications.
Easy to clean.
BS 4800 shades.
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations.
Contains an active Anti-Microbial
For walls and...
From the Flamebar product range, Bollom Flamebar N5 is a specially formulated, effective economical water based flame retardant solution designed to improve safety.
Straw wall boards
Nu-Flame Clear Overcoat is a clear varnish finish coating with flame retardant qualities for application onto timber surfaces. Tested to BS476 Part 7 Class 1 surface spread of flame and BS476 Part 6 Fire propagation.
Protects against humidity, heat and wear and tear
Satin and Gloss finishes available
Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours.
Nu-Flame FR Scrubbable Colourcoat is a matt paint finish with flame retardant properties. Ideal for internal use and is easy to clean. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Meets Class 1 of ISO 11998 for scrub resistance.
Easy to clean.
Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...
Envirograf QVFR White Fire Protection Coating is for wood and certain wood related products. It is suitable for upgrading new and already coated timber and wood related surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0. It leaves a matt white finish, in instances where the coating may be subject to damage or high humidity a suitable...
Thermoguard Timbercoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke & Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...
Nu-Flame Timbercoat (Intumescent) is an ideal paint and fire-retarding treatment for internal wood and timber structures and fittings. Tested to BS 476 part 6 & 7 and satisfies Class '0' Requirements of current Building Regulations.
Fire-retardant for wood/timber.
12-month shelf life.
Bollom Broflame Ultra Basecoat is a decorative, thin film intumescent base coat that delivers a Class 0 rating over solid timber and particle boards when used in conjunction with Bollom Flameguard Ultra Topcoats.
Achieves Class 0 fire protection rating to BS476: Parts 6 and 7
Hard wearing protective/decorative finish...
Envirograf EP/CP is a white fire protection coating for plasterboard and lath-&-plaster ceilings of various thicknesses:
BS Class 0 & 1, EU standard B/s1/d0 & up to 60 minutes' protection
Develops a microporous intumescent layer with a smooth decorative finish
When attacked by fire, the intumescent material protects the coated area’s integrity &...
Envirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid:
Used to prime/seal surfaces which may be absorbent, dusty or friable prior to painting/bonding
Ideal for plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster)
And sealing wood when using Product 38 Intumescent...
Nu-Flame SP Multi Surface Primer is a white water-soluble primer that forms part of the Nu-Flame Fire Upgrade System.
Suitable for glass, tile, melamine and powder coating.
Envirograf ES/VFR Primer is a water-based clear primer to apply over existing paint or varnish surfaces before applying subsequent compatible fire protection systems to improve compatibility and adhesion with various substrates.