Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with anti-graffiti properties. Water-soluble, easy to clean and available in BS 4800 shades.
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with excellent anti-graffiti properties, and serves as the final coat to the Nu-Flame Fire Protection Coating for walls and ceilings. The Nu-Flame fire retardant paint system reduces the need for chemical stripping of the walls, and because it's water-based, it presents no health hazards and odours are reduced during the application.
Final coat to the Nu-Flame Fire Protection Coating for walls and ceilings. Ensure surfaces to be treated are clean, free from contamination and dry.
By brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Store away from direct sunlight and sources of heat. Protect from frost.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Nu-Flame Heat Insulating Basecoat is designed to insulate flammable paint systems and control surface spread of flame and fire propagation. Advantages Undercoat for the Nu-Flame System. Intumescent coating. Insulates from heat and oxygen. 12-month shelf life.
Thermoguard Fire Varnish 30 and 60 Minute System is a clear intumescent varnish for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Fire Varnish Basecoat) and topcoat (Fire Varnish Overcoat (Interior) / (Exterior)) to ensure protection is achieved inline with the manufacturers recommendations to the...
From the Flamebar product range, Bollom Flamebar N5 is a specially formulated, effective economical water based flame retardant solution designed to improve safety. Recommended Uses Cardboard Pulpboard Hardwood Straw wall boards Plywood Stage props
Nu-Flame FR Anti-Bacterial Colourcoat is an Anti-Microbial finish with flame retardant properties. Protects against many commonly found bacteria (e.g. Salmonella and MRSA). Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Advantages Flame retardant Contains an active Anti-Microbial For walls and...
Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the...
Bollom Broflame Ultra Basecoat is a decorative, thin film intumescent base coat that delivers a Class 0 rating over solid timber and particle boards when used in conjunction with Bollom Flameguard Ultra Topcoats. ADVANTAGES Achieves Class 0 fire protection rating to BS476: Parts 6 and 7 Hard wearing protective/decorative finish...
Thermoguard Thermoproof Interior Fluid is a clear, colourless, penetrating Fire Protection with an optional functional Thermoguard Thermoproof Interior Sealer for wear, damp & UV resistance available in clear or woodstain colours.
Envirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid: Used to prime/seal surfaces which may be absorbent, dusty or friable prior to painting/bonding Ideal for plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster) And sealing wood when using Product 38 Intumescent...
Envirograf HWAP/WB Primer is a clear water based primer: For use under Envirograf HW01 and HW02E Intumescent coatings Can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate Application by brush or roller
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coat externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish 30 & 60 Minute System for 30 & 60 minutes Fire Resistance.
Zeroflame Fire Retardant Treatment is for use on wood and timber: Soaks virtually ‘invisibly’ into woods and timber Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers Can be overcoated for decorative purposes For internal and external use Certificate application included Remains...
Thermoguard Fire Varnish Overcoat (Interior) is a water based, clear UV and wear resistant varnish: The final coat of a 2 coat Thermoguard system For the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. See Thermoguard Fire Varnish 30 & 60 Minute System for 30 or 60 minutes Fire Resistance...
Thermoguard Fire Retardant Varnish Overcoat (Exterior) is for use in combination with and over Thermoguard Fire Varnish Basecoat in external applications. ADVANTAGES For timber/timber derived substrates Clear, UV and wear-resistant finish Certificate of Supply available Certificated when used over the basecoat: BS EN Class B s2 d0 Class 1 and...
Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours.
Nu-Flame Clear Overcoat is a clear varnish finish coating with flame retardant qualities for application onto timber surfaces. Tested to BS476 Part 7 Class 1 surface spread of flame and BS476 Part 6 Fire propagation. Advantages Protects against humidity, heat and wear and tear Satin and Gloss finishes available 12m²/Litre coverage
Nu-Flame Timbercoat (Intumescent) is an ideal paint and fire-retarding treatment for internal wood and timber structures and fittings. Tested to BS 476 part 6 & 7 and satisfies Class '0' Requirements of current Building Regulations. Advantages Fire-retardant for wood/timber. Internal use. Water-soluble. 12-month shelf life.
