We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Hensel Hensotherm 1 KS Clear Interior is a single component, transparent intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 12mm.
Fire behaviour is classified B-s1, d0 according to DIN EN 13501 (SBI-test)
Classifies solid wood and wooden materials as hardly combustible B1
Synthetic resin dispersion
Contains no solvents or formaldehyde - Low VOC contents
Milky consistency during application, but becomes completely clear/transparent when dry so that the surface structure of the wood remains visible
Suitable for impact walls in sports halls
Please Note: This product is moisture sensitive - After Hensel Hensotherm 1 KS Clear Interior has dried (approximately 12-24 Hours @20°C) Hensel Hensotop 84 AF Top Coat MUST BE applied immediately to protect against moisture
Hensel Hensotherm 1 KS Clear Interior is a single component, transparent intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 12mm.
It has a milky consistency during application, which becomes completely clear/transparent when dry so that the surface structure of the wood remains visible.
Hensel Hensotherm 1 KS Clear Interior has a fire behaviour classification of B-s1, d0 according to DIN EN 13501 (SBI-test). Classifies solid wood and wooden materials as hardly combustible B1. Please see the Fire Classification Report for details.
Please Note: This product is moisture sensitive - After Hensel Hensotherm 1 KS Clear Interior has dried (approximately 12-24 Hours @20°C) Hensel Hensotop 84 AF Top Coat MUST BE applied immediately to protect against moisture.
This product is a 'Hensel Green Product'which contains no solvents or formaldehyde, with low VOC contents.
Fire behaviour is classified B-s1, d0 according to DIN EN 13501 (SBI-test)
Classifies solid wood and wooden materials as hardly combustible B1
Synthetic resin dispersion
Contains no solvents or formaldehyde - Low VOC contents
Milky consistency during application, but becomes completely clear/transparent when dry so that the surface structure of the wood remains visible
Suitable for impact walls in sports halls
Please Note: This product is moisture sensitive - After Hensel Hensotherm 1 KS Clear Interior has dried (approximately 12-24 Hours @20°C) it is imperative that the Hensel Hensotop 84 AF Top Coat is applied immediately to protect against moisture
Use Hensel Holzgrund SB Primer as a saturation coat for highly absorbent wooden surfaces, or for the improvement of adhesion of the fire retardant coating on smooth surfaces
Shop Application:
For shop application of Hensel Hensotherm 1 KS Clear Interior please contact Technical Support on 0113 2455450 (option 2) or send a message to [email protected]
Do not thin
Please Note: After Hensel Hensotherm 1 KS Clear Interior has dried (approximately 12-24 Hours @20°C) Hensel Hensotop 84 AF Top Coat MUST BE applied immediately to protect against moisture
Surface Maintenance:
Do not clean with water
Do not use acid or alkaline cleaner
Do not use solvent
Surface clean only with a dry and smooth cloth
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
HEN003
Data sheet
Manufacturer
Hensel
For Use On
Wood, Timber
Application Method
Airless Spray, Brush, Roller
Single, Two or Three Pack
Single
Product Certifications
B-s1, d0 according to DIN EN 13501 (SBI-test), Classifies solid wood and wooden materials as hardly combustible B1
Pack Size
2 x 120ml Sample Pack, 6kg, 12.5kg, 25kg
Key Features
Transparent intumescent coating for the fire protection of interior wooden structures
Dry to Recoat (at 20°C)
Approx. 12-24 hours
Coverage
300 g/m²
Compatible Primers
Hensel Holzgrund SB Primer, Hensel Holzgrun AQ Primer
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hensel Hensotherm 1 KS Clear Interior is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hensel Holzgrund SB Primer is a single component, transparent adhesion promoting primer for wood. It is suitable for use on highly absorbent wooden surfaces. Part of the Hensel Hensotherm Fire Protection Range.Solvent-Based For use on solid wood and wooden substrates Ideal for use as a saturation coat on highly absorbent wooden surfaces...
Hensel Holzgrund AQ Primer is a single component water-based, transparent adhesion promoting primer for wood. It is suitable for use on highly absorbent wooden surfaces. Part of the Hensel Hensotherm Fire Protection Range.For use on solid wood and wooden substrates Ideal for use as a saturation coat on highly absorbent wooden surfaces...
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Hensel Hensotop 84 AF Top Coat is a solvent-based single component, fast-drying, transparent top coat for use over Hensel Hensotherm 1 KS Clear...