Hensel Hensotop SB (formerly Hensotop 84)is a solvent-based single component,halogen-free and fast-drying top coat for Hensotherm fire protection coatings for indoor and outdoor use. For use on interior and exterior wood or steel as part of a system.
Available in a wide range of colours including RAL shades
Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg
Provides protection from moisture and other environmental influences
Available in Silk-Matt - Gloss level varies depending on the colour shade
Please Note: If steel surfaces are regularly exposed to intense heat/high temperatures of above + 45 °C, do not use dark colours as top coating
5kg, 10kg and 25kg are available in standard and selected RAL Colours - Standard colour shades are available in 2.5kg - White RAL 7016, RAL 7035, RAL 9002
Please note:Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Ordering References
Weight
Shipping
Hensotop SB (All Colours)
2.5KG, 5KG, 10KG, 25KG
14-21 Working Days (£50.00 + VAT)
Product customisation
Don't forget to save your customization to be able to add to cart
Hensel Hensotop SB (formerly Hensotop 84)is a solvent-based single component,halogen-free and fast-drying top coat for Hensotherm fire protection coatings for indoor and outdoor use. For use on interior and exterior wood or steel as part of a system.
Hensel Hensotop SB is available in a wide range of colours including RAL shades. Special colour shades including Sikkens, NCS or samples are available on request – with a minimum order quantity of 10kg. Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further details.
Please Note: If steel surfaces are regularly exposed to intense heat/high temperatures of above + 45 °C, do not use dark colours as top coating.
Available in a wide range of colours including RAL shades
Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg
Provides protection from moisture and other environmental influences
Dust Dry after approx. 45 minutes @20°C - Dry to recoat after approx. 24 hours
Available in Silk-Matt - Gloss level varies depending on the colour shade
Please Note: If steel surfaces are regularly exposed to intense heat/high temperatures of above + 45 °C,do notuse dark colours as top coating
Hensotop top coats offer the possibility of coloured design, protection against moisture and should be applied when the surfaces, during the usage, are exposed to environmental influences, regular cleaning and similar external influences
Notes
Mustonly be applied after the Hensotherm fire protection hasfully dried(approximately 24 Hours @20°C and after a positive fingernail test)
If Hensotop SB must be applied out of different batches, mix both materials (of the same colour shade) together before application
Colour shades containing metallic pigments may change by thinning with water or by application by brush or roller
The temperature of the steel surface and the ambient temperature must remain between +15°C & +25°C during the coating procedure. Do notapply below +10°C or above +35°C
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5838-895633
Data sheet
Manufacturer
Hensel
Interior / Exterior Use
Interior & Exterior
For Use On
Wood, Steel
Application Method
Brush, Roller, Spray
Sheen
Silk Matt
Single, Two or Three Pack
Single
Pack Size
2.5kg, 5kg, 10kg, 25kg
Key Features
Solvent based topcoat for Hensotherm fire protection coatings available in a range of RAL colours
Dry to Recoat (at 20°C)
Approx 24 hours
Fully Cured (at 20°C)
Approx 48 hours
Coverage
4-7m²/kg
Recommended Thinner/Cleaner
Hensel Hensotherm V 45 Thinner
Compatible Primers
Hensel Hensotherm 2 KS White Interior, Hensel Hensotherm 2 KS Black Interior
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hensel Hensotop SB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hensel Hensotherm 2 KS White Interior is a single component, white intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 8mm and a density of under 338 kg/m³.Fire behaviour is classified B-s1, d0 according to DIN EN 13501...
Hensel Hensotherm 2 KS Black Anthracite Interior is a single component, black anthracite intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 12mm. It has been specially developed for the fire protection of wooden structures used...