Hensel Hensotop WB (formerly Hensotop 84 AQ)is a water-based single component,halogen-free and fast-drying top coat for water-based Hensotherm fire protection coatings. For use on interior and exterior wood.
Available in a wide range of colours including RAL shades
Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg
Provides protection from moisture and other environmental influences
Please Note: Due to thermal overheating do not use dark colours as top coating behind glass facades
Note: Micaceous iron oxide shades shown on the colour picker are approximate (RAL 9006, RAL 9007, DB 701, DB 702, DB 703, DB 704) and are for illustrative purposes only
Please note:Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Ordering References
Weight
Shipping
Hensotop WB (All Colours)
5KG, 10KG
14-21 Working Days (£50.00 + VAT)
Product customisation
Don't forget to save your customization to be able to add to cart
Hensel Hensotop WB (formerly Hensotop 84 AQ) is a water-based single component, halogen-free and fast-drying top coat for water-based Hensotherm fire protection coatings. For use on interior and exterior wood.
Hensel Hensotop WB is available in a wide range of colours including RAL shades. Special colour shades including Sikkens, NCS or samples are available on request – with a minimum order quantity of 10kg. Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further details.
Please Note: Due to thermal overheating do not use dark colours as top coating behind glass facades
Hensel Hensotop WB is available in selected 'DB' Colour Shades, which are micaceous iron oxide shades developed for the 'Deutsche Bahn' railway network in Germany, primarily for use in stations.
DB Colour Swatch:
Please Note: Micaceous iron oxide shades shown on the colour picker and above are approximate (RAL 9006, RAL 9007, DB 701, DB 702, DB 703, DB 704) and are for illustrative purposes only.
Dust Dry after approx. 45 minutes @20°C - Dry to recoat after approx. 24 hours
Please Note: Due to thermal overheating do not use dark colours as top coating behind glass facades
Notes
Hensotop top coats offer the possibility of coloured design, protection against moisture and should be applied when the surfaces, during the usage, are exposed to environmental influences, regular cleaning and similar external influences
Mustonly be applied after the Hensotherm fire protection hasfully dried(approximately 24 Hours @20°C and after a positive fingernail test)
If Hensotop WB must be applied out of different batches, mix both materials (of the same colour shade) together before application
Colour shades containing metallic pigments may change by thinning with water or by application by brush or roller
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5842-896408
Data sheet
Manufacturer
Hensel
Interior / Exterior Use
Interior & Exterior
For Use On
Wood
Application Method
Brush, Roller, Spray
Sheen
Satin
Single, Two or Three Pack
Single
Pack Size
5kg, 10kg
Key Features
Water based topcoat for Hensotherm fire protection coatings available in a range of RAL colours
Dry to Recoat (at 20°C)
Approx 24 hours
Fully Cured (at 20°C)
Approx 24 hours
Coverage
150 – 180 g/m² (depends on colour shade)
Compatible Primers
Hensel Hensotherm 2 KS White Interior, Hensel Hensotherm 2 KS Black Anthracite Interior
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hensel Hensotop WB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hensel Hensotherm 2 KS White Interior is a single component, white intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 8mm and a density of under 338 kg/m³.Fire behaviour is classified B-s1, d0 according to DIN EN 13501...
Hensel Hensotherm 2 KS Black Anthracite Interior is a single component, black anthracite intumescent coating for the fire protection of interior wooden structures. For use on solid wood, particle boards and plywood for construction with a thickness of under 12mm. It has been specially developed for the fire protection of wooden structures used...