Bollom Intulac Ultra Basecoat
Bollom Intulac Ultra Basecoat is a clear, high-performance fire protection varnish coating for interior wood surfaces.
- Can be applied over existing varnish
- Simple 3 coat system to achieve Class 0
- Single pack products
- No mixing required
- Protects and highlights natural beauty of the wood
- For interior use
- Diminishes flue-gas density/temperature
- Insulates against heat
Bollom Intulac Ultra Basecoat is a clear high performance fire protection varnish coating for interior wood surfaces. Use with Bollom Intulac Ultra Topcoat Satin or Matt Finish to complete the protective coating system to deliver Class 0 and fire performance.
The Bollom Intulac Ultra Varnish system provides a high performance fire protection coating system for interior wood surfaces. It comprises a clear, intumescent base coat – designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood – and a clear, protective top coat (available in Matt and Satin finishes).
It is not suitable for surfaces exposed to mechanical stress, such as floors, doors, stairs etc.
- Communal areas
- Fibre insulation board
- Veneering less than 12mm thick
Intulac Ultra Base Coat is designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood. It reduces ignitability of soft and hard wood and other wood derivatives. It also insulates against heat, checks fire, prevents propagation of fire and diminishes flue-gas density and flue-gas temperature.
NB: Bollom Intulac Ultra Basecoat must be overcoated with Bollom Intulac Ultra Topcoat after 48 hours and not more than 4 days. It is important to speak to our Technical Department and refer to the product data sheet prior to using this product to ensure the correct specification has been chosen for your surface.
Features and Benefits
- Can be applied over existing varnish - Maximum of four, single, well-adhered coats
- Simple 3 coat system to achieve Class 0
- Single pack products so no mixing required
- Protects and highlights the natural beauty of the wood - ideal for timber in communal areas.
- For interior use only. Not suitable for surfaces exposed to mechanical stress, such as floors, doors, stairs etc.
Coverage and Application
Bollom Intulac Ultra Basecoat should be applied undiluted by brush, roller or spray. Surfaces to be painted must be primed with Bollom Intulac™ Ultra Intumescent Base Coat
and dry, free from dust, oil, wax, grease and release agents. Apply two coats of Bollom Intulac Ultra Basecoat to a coverage rate of 5m² per litre, per coat (this means a 5lt tin will cover a total of 12.5m² after the two coats). The Intulac Ultra system requires the application of both the Intumescent Base Coat and Protective Top Coat. The Intulac Ultra Basecoat must be left a minimum of 48 hours and max of 4 days prior to applying the Intulac Ultra Topcoat. Apply 1 coat of Bollom Intulac Ultra Topcoat at 25m² per litre.
How to get Fire Certification
It’s simple, just keep proof of purchase, batch numbers of the products used along with site details and contact Bollom Customer Services Department on 0191 410 6611 with the information and they will send you the relevant Certificate of Supply within 5 working days.
The Bollom Intulac Ultra range has been made with the professional painter and decorator in mind and all products are easy to apply and have been fire tested to BS 476 Parts 6, 7.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close