Bollom Intulac Ultra BS Class 0 Kit

    Brosteel7865
    BOL7865

    Bollom Intulac Ultra BS Class 0 Kit is a clear, fire-retardant varnish system that provides sufficient intumescent basecoat (Bollom Intulac Ultra Basecoat) and topcoat (Bollom Intulac Ultra Topcoat) to protect bare or previously varnished* interior timber surfaces** to BS Class 0.

    *Maximum of four, single, well-adhered coats.

    **Not suitable for surfaces exposed to mechanical stress such as floors, doors, handrails, stairs etc.

    Colour
    Size
    Finish
    £240.33(ex. VAT)
    £288.40 (inc. VAT)
    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    Quick Links - Click To Jump To Section:




    Recommended Uses


    • Communal Areas
    • Softwood
    • Hardwood
    • Plywood
    • Chipboard
    • Fibre Insulation Board
    • Hardboard
    • Veneering greater than or equal to 12mm thick

     

    Intulac Ultra Base Coat is designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood. It reduces ignitability of soft and hard wood and other wood derivatives. It also insulates against heat, checks fire, prevents propagation of fire and diminishes flue-gas density and flue-gas temperature.

    NB: Bollom Intulac Ultra Basecoat must be overcoated with Bollom Intulac Ultra Topcoat after 48 hours and not more than 4 days.



    Pack Features & Benefits


    • Can be applied over existing varnish - maximum of four, single, well-adhered coats
    • Simple 3 coat system to achieve Class 0
    • Single pack products so no mixing required
    • Protects and highlights the natural beauty of the wood - ideal for timber in communal areas
    • Certificate of Supply available with every purchase – Apply ‘HERE
    • Can be applied by brush, roller or spray



    Pack Contents


    Each pack contains:



    Surface Preparation


    Surface must be dry, free from dust, oil, wax, grease, release agents, etc. Wood substrates with wetting difficulties should be roughened thoroughly with abrasive paper. The moisture content of the timber should be below 15%. For particularly resinous or knotty timber apply 1 coat of Zinsser Sealcoat. Application over a maximum of four, well adhered, single coats of existing varnish is possible, sand lightly before applying Intulac Ultra Base Coat.



    System Application


    To suitably prepared surfaces apply two coats of Bollom Intulac Ultra Basecoat at a coverage rate of 5m²/litre per coat allowing a minimum of 16 hours between coats. Following application of the 2nd coat of Basecoat, allow to dry for 48 hours before applying one coat of Bollom Intulac Ultra Topcoat Matt or Satin. The topcoat should be dry in approximately 6 hours at 20°C – lower temperatures and relative humidity may extend drying times.

    In order to obtain a very smooth finish by cutting down wood fibres, light sanding using 150grit sandpaper after the 1st coat of Basecoat is recommended.

    Neither the Basecoat or Topcoat should be thinned for application regardless of application method. Natural fine bristle brush or short pile lambs wool roller is recommended.



    Application Conditions


    Object temperature should not be below 10°C or exceed 40°C. Relative humidity should not exceed 70%. Application temperature shall be at least ≥ 3 K above dew point. In cases where relative humidity may exceed 70%, special measures must be taken to prevent condensation forming during application of the product.



    Clean Up


    Bollom Intulac Basecoat is water based so any application equipment can be cleaned with water. Bollom Intulac Topcoat is solvent based so any application equipment should be cleaned with Xylene.



    Certification


    To receive a 'Certificate of Supply' for your purchase, after application of the product, simply complete the online form via the 'Apply For Certification' button HERE. Your certificate should be returned to you within 7-10 working days.

     



    IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.



    Product Details
    7865-910062

    Data sheet

    Manufacturer
    Bollom
    Interior / Exterior Use
    Interior Use
    For Use On
    Wood
    For Use On
    Plasterboard
    For Use On
    Plywood
    Application Method
    Brush, Roller, Spray
    Single, Two or Three Pack
    Two-Pack
    Suitable For Use On
    Plasterboard
    Suitable For Use On
    Walls
    Suitable For Use On
    Wood
    Finish
    Satin
    Finish
    Matt
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Product Usage Type
    Varnish
    Product Range
    Intulac
    Fastest Delivery
    Next Working Day
    Colour Family
    Clear
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Bollom Intulac Ultra BS Class 0 Kit is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Bollom Intulac Ultra Topcoat

    High performance decorative varnish system that delivers excellent clear fire protection to interior wood and timber.To be applied over Bollom Intulac Ultra Basecoat to complete a Class 0 fire-rated system Certificates of conformance & installation available Single packMore Info View Similar Products Delivery Info

    Price £42.23 (ex. VAT)
    In Stock and Available for Delivery

    Bollom Intulac Ultra Basecoat

    A clear, high-performance fire protection varnish coating for interior wood surfaces.Can be applied over existing varnish Simple 3 coat system to achieve Class 0 Single pack products Protects and highlights natural beauty of the wood Diminishes flue-gas density/temperature Insulates against heatMore Info View Similar Products...

    Price £198.11 (ex. VAT)
    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)
    In Stock and Available for Delivery